Grove Gear NH-UMQ830-100-L-56 NHU30001072.00
- Write a review
$1,645.38
AssemblyUMQCenter Distance Range1" thru 3.25"Frame Size56CGear TypeWormHousing materialCast IronHP Range1/2 to 3/4 HP (< 1)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP0.603Input Keyway (C Face)3/16 x 3/32Input Quill Diameter (in)0.625Input RPM1750Input StyleC-Face QuillKeyway3/16 X 3/32Model CodeUMQ830Motor Frame Size56CMounting StyleHorizontal Base, Worm UnderNo. of Gear ReductionsSingleOutput Diameter (in)1.25Output HP0.367Output Key1/4 X 1.75Output RPM17Output ShaftShaftOutput Shaft DirectionLeftOutput Torque Range1000 to 2500 in lbsOutput Torque Rating (in-lb)1321Overhung Load1950Product TypeRight AngleRatio100:01:00Ratio Range100:1 to 250:1ReducerWorm - Right AngleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersService Factor1Shaft Seal MaterialViton
Specifications
| Assembly | UMQ |
| Center Distance Range | 1" thru 3.25" |
| Frame Size | 56C |
| Gear Type | Worm |
| Housing material | Cast Iron |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP | 0.603 |
| Input Keyway (C Face) | 3/16 x 3/32 |
| Input Quill Diameter (in) | 0.625 |
| Input RPM | 1750 |
| Input Style | C-Face Quill |
| Keyway | 3/16 X 3/32 |
| Model Code | UMQ830 |
| Motor Frame Size | 56C |
| Mounting Style | Horizontal Base, Worm Under |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 1.25 |
| Output HP | 0.367 |
| Output Key | 1/4 X 1.75 |
| Output RPM | 17 |
| Output Shaft | Shaft |
| Output Shaft Direction | Left |
| Output Torque Range | 1000 to 2500 in lbs |
| Output Torque Rating (in-lb) | 1321 |
| Overhung Load | 1950 |
| Product Type | Right Angle |
| Ratio | 100:01:00 |
| Ratio Range | 100:1 to 250:1 |
| Reducer | Worm - Right Angle |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
NHU30001072.00