Dodge 23S25HAWP 25:1 Ratio Hollow Bore 0.875" Input Shaft 2.3" Center Distance White PaintRatio: 25:1Center Distance: 2.3"Input:
- Write a review
$1,443.49
Base to output center height2.5000 in, 63.5 mmBore dia output1.5000 in, 38.1 mmBore length6.6200 in, 168.148 mmCase size23Center distance (in)2.3 in, Center distance (in):2.3100 in, 58.674 mmHorsepower rating input1.6500 hp, 1.23 kWHorsepower rating output1.3200 hp, 0.984 kWHousing materialCast ironInput0.875 in Input ShaftInput HP1.65Input styleSeparateLubrication typePAG, standard temperatureMounting bolt pattern length5.0000 in, 127.0 mmMounting bolt pattern width2.8800 in, 73.152 mmNominal ratio25OutputHollow boreOutput bore/shaft diameter1.5 inOutput horse power1.32Output styleHollow alternateOverhung load1610 lbf, 7161.637 NPaint typeWhite epoxyPaint/coatingWhiteRated torque output1184 in/lb, 1184.0 in/lbRatio25 to 1Seal typeSingle-lip contactShaft dia input0.8750 inShaft length input1.1700 in, 29.718 mmSuitable for washdownNoThermal horsepower rating2.1600 hp, 1.611 kW
Specifications
| Base to output center height | 2.5000 in, 63.5 mm |
| Bore dia output | 1.5000 in, 38.1 mm |
| Bore length | 6.6200 in, 168.148 mm |
| Case size | 23 |
| Center distance (in) | 2.3 in, Center distance (in):2.3100 in, 58.674 mm |
| Horsepower rating input | 1.6500 hp, 1.23 kW |
| Horsepower rating output | 1.3200 hp, 0.984 kW |
| Housing material | Cast iron |
| Input | 0.875 in Input Shaft |
| Input HP | 1.65 |
| Input style | Separate |
| Lubrication type | PAG, standard temperature |
| Mounting bolt pattern length | 5.0000 in, 127.0 mm |
| Mounting bolt pattern width | 2.8800 in, 73.152 mm |
| Nominal ratio | 25 |
| Output | Hollow bore |
| Output bore/shaft diameter | 1.5 in |
| Output horse power | 1.32 |
| Output style | Hollow alternate |
| Overhung load | 1610 lbf, 7161.637 N |
| Paint type | White epoxy |
| Paint/coating | White |
| Rated torque output | 1184 in/lb, 1184.0 in/lb |
| Ratio | 25 to 1 |
| Seal type | Single-lip contact |
| Shaft dia input | 0.8750 in |
| Shaft length input | 1.1700 in, 29.718 mm |
| Suitable for washdown | No |
| Thermal horsepower rating | 2.1600 hp, 1.611 kW |
23S25HAWP