Grove Gear NH-H813-5-H1-10 5:1 Ratio, 0.5" Input Diameter, 0.625" Output Diameter, Right Angle Cast Iron Single-Reduction Worm R
- Write a review
$703.40
AssemblyH-H1Bore Code10Center Distance1.3 In.Center distance (in)1.33Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range1/2 to 3/4 HP (< 1)Input Diameter (in)0.5Input HP0.823Input HP @ 1750 RPM1.248Input RPM1750Input StyleSolid Input ShaftKeyway1/8 X 1.00Max OHL (Output Shaft)860Max Thrust Load (Output Shaft)827Model CodeH813Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)0.625Output Hollow Shaft Diameter (in)0.625Output HP0.729Output Key3/16 X 1.50Output RPM350Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque209Output Torque Range250 to 500 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))860Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio5 to 1Ratio Range5-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-H-H1Service Factor1Shaft Seal MaterialVitonThrust Rating - output shaft827
Specifications
| Assembly | H-H1 |
| Bore Code | 10 |
| Center Distance | 1.3 In. |
| Center distance (in) | 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Input Diameter (in) | 0.5 |
| Input HP | 0.823 |
| Input HP @ 1750 RPM | 1.248 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/8 X 1.00 |
| Max OHL (Output Shaft) | 860 |
| Max Thrust Load (Output Shaft) | 827 |
| Model Code | H813 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 0.625 |
| Output Hollow Shaft Diameter (in) | 0.625 |
| Output HP | 0.729 |
| Output Key | 3/16 X 1.50 |
| Output RPM | 350 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 209 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 860 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 5 to 1 |
| Ratio Range | 5-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 827 |
NH8130501.10