Grove Gear EL-H813-25-H_-10 25:1 Ratio, 0.5" Input Diameter, 0.625" Output Diameter, Right Angle Aluminum Single-Reduction Worm
- Write a review
$1,080.09
AssemblyH-H1Bore Code10Center Distance1.3 In.Center distance (in)1.33Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialAluminumHP Range1/3 HP or Less (< 1/2)Input Diameter (in)0.5Input HP0.445Input RPM1750Input StyleSolid Input ShaftKeyway1/8 x 1.00Model CodeH813Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)0.625Output Hollow Shaft Diameter (in)0.625Output HP0.344Output Key3/16 X 1.50Output RPM70Output Shaft Assembly CodeH1Output Shaft OrientationH1Output StyleH1Output Torque309Output Torque Range250 to 500 in lbsOutput typeHollow borePaint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio25 to 1Ratio Range25-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries StyleEL-H-H1Service Factor1Shaft Seal MaterialViton
Specifications
| Assembly | H-H1 |
| Bore Code | 10 |
| Center Distance | 1.3 In. |
| Center distance (in) | 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Aluminum |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Diameter (in) | 0.5 |
| Input HP | 0.445 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/8 x 1.00 |
| Model Code | H813 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 0.625 |
| Output Hollow Shaft Diameter (in) | 0.625 |
| Output HP | 0.344 |
| Output Key | 3/16 X 1.50 |
| Output RPM | 70 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 309 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 25 to 1 |
| Ratio Range | 25-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Style | EL-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
EL8130506.10