Grove Gear EL-H824-100-H1-23 100:1 Ratio, 0.75" Input Diameter, 1.438" Output Diameter, Right Angle Aluminum Single-Reduction Wo
- Write a review
$1,737.04
AssemblyH-H1Bore Code23Center Distance2.4 In.Center distance (in)2.38Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHeight (in)10.50Housing materialAluminumHP Range1/3 HP or Less (< 1/2)Input Diameter (in)0.75Input HP0.307Input RPM1750Input StyleSolid Input ShaftKeyway3/16 x 1.63Length (in)10.69Model CodeH824Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)1.438Output Hollow Shaft Diameter (in)1.438Output HP0.18Output Key3/8 x 3.00Output RPM17.5Output Shaft Assembly CodeH1Output Shaft OrientationH1Output StyleH1Output Torque648Output Torque Range500 to 1000 in lbsOutput typeHollow borePaint/CoatingAluminumProduct LineEL Series - Aluminum Worm Gear ReducersProduct TypeRight AngleRatio100 to 1Ratio Range100-1 to 250-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesEL Series - Aluminum Worm Gear ReducersSeries StyleEL-H-H1Service Factor1Shaft Seal MaterialVitonWidth (in)9.06
Specifications
| Assembly | H-H1 |
| Bore Code | 23 |
| Center Distance | 2.4 In. |
| Center distance (in) | 2.38 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Height (in) | 10.50 |
| Housing material | Aluminum |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Diameter (in) | 0.75 |
| Input HP | 0.307 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 3/16 x 1.63 |
| Length (in) | 10.69 |
| Model Code | H824 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 1.438 |
| Output Hollow Shaft Diameter (in) | 1.438 |
| Output HP | 0.18 |
| Output Key | 3/8 x 3.00 |
| Output RPM | 17.5 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 648 |
| Output Torque Range | 500 to 1000 in lbs |
| Output type | Hollow bore |
| Paint/Coating | Aluminum |
| Product Line | EL Series - Aluminum Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 100 to 1 |
| Ratio Range | 100-1 to 250-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | EL Series - Aluminum Worm Gear Reducers |
| Series Style | EL-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Width (in) | 9.06 |
EL8240512.23