Grove Gear NH-H813-50-H1-10 50:1 Ratio, 0.5" Input Diameter, 0.625" Output Diameter, Right Angle Cast Iron Single-Reduction Worm
- Write a review
$703.40
AssemblyH-H1Bore Code10Center Distance1.3 In.Center distance (in)1.33Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormHousing materialCast ironHP Range1/3 HP or Less (< 1/2)Input Diameter (in)0.5Input HP0.285Input HP @ 1750 RPM0.285Input RPM1750Input StyleSolid Input ShaftKeyway1/8 X 1.00Max OHL (Output Shaft)860Max Thrust Load (Output Shaft)1144Model CodeH813Mounting StyleShaft MountNo. of Gear ReductionsSingleOutputHollowOutput Diameter (in)0.625Output Hollow Shaft Diameter (in)0.625Output HP0.182Output Key3/16 X 1.50Output RPM35Output Shaft Assembly CodeH1Output Shaft DirectionH1Output Shaft OrientationH1Output StyleH1Output Torque327Output Torque Range250 to 500 in lbsOutput typeHollow boreOverhung Load Rating (Output Shaft(lb))860Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio50 to 1Ratio Range50-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-H-H1Service Factor1Shaft Seal MaterialVitonThrust Rating - output shaft1144
Specifications
| Assembly | H-H1 |
| Bore Code | 10 |
| Center Distance | 1.3 In. |
| Center distance (in) | 1.33 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| Housing material | Cast iron |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Diameter (in) | 0.5 |
| Input HP | 0.285 |
| Input HP @ 1750 RPM | 0.285 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/8 X 1.00 |
| Max OHL (Output Shaft) | 860 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | H813 |
| Mounting Style | Shaft Mount |
| No. of Gear Reductions | Single |
| Output | Hollow |
| Output Diameter (in) | 0.625 |
| Output Hollow Shaft Diameter (in) | 0.625 |
| Output HP | 0.182 |
| Output Key | 3/16 X 1.50 |
| Output RPM | 35 |
| Output Shaft Assembly Code | H1 |
| Output Shaft Direction | H1 |
| Output Shaft Orientation | H1 |
| Output Style | H1 |
| Output Torque | 327 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Hollow bore |
| Overhung Load Rating (Output Shaft(lb)) | 860 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 50 to 1 |
| Ratio Range | 50-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-H-H1 |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| Thrust Rating - output shaft | 1144 |
NH8130509.10