Grove Gear NH-B852-15-D 15:1 Ratio, 1.25" Input Diameter, 2" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Reduce
- Write a review
$4,329.39
AssemblyB-DCenter Distance5.2 In.Center distance (in)5.25Center Distance RangeAbove 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/8 - 11 UNCHousing materialCast ironHP Range15 HP (< 20)Input Diameter (in)1.25Input HP18.11Input HP @ 1750 RPM18.11Input RPM1750Input StyleSolid Input ShaftKeyway1/4 X 3.00Max OHL (Output Shaft)3560Max Thrust Load (Output Shaft)3033Model CodeB852Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)2.000Output HP16.55Output Key1/2 x 2.50Output RPM116Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque8941Output Torque Range5000 to 10000 in lbsOutput typeSolid ShaftOverhung Load3560Paint/CoatingBlueProduct LineNH Series - Ironman Narrow Housing Worm Gear ReducersProduct TypeRight AngleRatio15 to 1Ratio Range15-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesNH Series - Ironman Narrow Housing Worm Gear ReducersSeries CodeNHSeries StyleNH-B-DService Factor1Shaft Seal MaterialVitonTAP Depth1.25Thrust Rating - output shaft3033
Specifications
| Assembly | B-D |
| Center Distance | 5.2 In. |
| Center distance (in) | 5.25 |
| Center Distance Range | Above 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/8 - 11 UNC |
| Housing material | Cast iron |
| HP Range | 15 HP (< 20) |
| Input Diameter (in) | 1.25 |
| Input HP | 18.11 |
| Input HP @ 1750 RPM | 18.11 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Keyway | 1/4 X 3.00 |
| Max OHL (Output Shaft) | 3560 |
| Max Thrust Load (Output Shaft) | 3033 |
| Model Code | B852 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 2.000 |
| Output HP | 16.55 |
| Output Key | 1/2 x 2.50 |
| Output RPM | 116 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 8941 |
| Output Torque Range | 5000 to 10000 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 3560 |
| Paint/Coating | Blue |
| Product Line | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Product Type | Right Angle |
| Ratio | 15 to 1 |
| Ratio Range | 15-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | NH Series - Ironman Narrow Housing Worm Gear Reducers |
| Series Code | NH |
| Series Style | NH-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 1.25 |
| Thrust Rating - output shaft | 3033 |
NH8520016.00