Morse 154Q56LR5 XC1111 5:1 Ratio 1.54" Center Distance 0.625" Input Bore (C Face) 0.625" Input Diameter C-Face Quill Input 0.75"
- Write a review
$886.20
AssemblyQ-LRCenter Distance (in)1.54 1.54Center Distance Range1" thru 3.25"Efficiency80Frame Size56CGear Ratio5:1Gear TypeWormH-Tap size5/16 - 18Housing MaterialCast IronHP Range1 to 1-1/2 (< 2)Input Bore (C Face)0.625Input Diameter (in)0.625Input HP @ 1750 RPM1.66Input Keyway (C Face)3/16 X 3/32Input RPM1750Input Speed1750Input StyleC-Face QuillModel154QMounting TypeNo BaseNo. of Gear ReductionsSingleOutput Diameter (in)0.75Output Key3/16 X 1.25Output RPM350Output Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput Torque Range250 to 500 in lbsOutput Torque Rating (in-lb)323 in-lbs @1750 input RPMOutput TypeSolid ShaftOverhung Load Rating (Output Shaft(lb))388Product TypeWorm Speed ReducerRatio Range5:1ReducerWorm - Right AngleReducer StyleStandardSeries CodeRaiderService Factor1Shaft Seal MaterialNitrileTAP Depth0.5Thrust Rating - output shaft806
Specifications
| Assembly | Q-LR |
| Center Distance (in) | 1.54 1.54 |
| Center Distance Range | 1" thru 3.25" |
| Efficiency | 80 |
| Frame Size | 56C |
| Gear Ratio | 5:1 |
| Gear Type | Worm |
| H-Tap size | 5/16 - 18 |
| Housing Material | Cast Iron |
| HP Range | 1 to 1-1/2 (< 2) |
| Input Bore (C Face) | 0.625 |
| Input Diameter (in) | 0.625 |
| Input HP @ 1750 RPM | 1.66 |
| Input Keyway (C Face) | 3/16 X 3/32 |
| Input RPM | 1750 |
| Input Speed | 1750 |
| Input Style | C-Face Quill |
| Model | 154Q |
| Mounting Type | No Base |
| No. of Gear Reductions | Single |
| Output Diameter (in) | 0.75 |
| Output Key | 3/16 X 1.25 |
| Output RPM | 350 |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Torque Range | 250 to 500 in lbs |
| Output Torque Rating (in-lb) | 323 in-lbs @1750 input RPM |
| Output Type | Solid Shaft |
| Overhung Load Rating (Output Shaft(lb)) | 388 |
| Product Type | Worm Speed Reducer |
| Ratio Range | 5:1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Standard |
| Series Code | Raider |
| Service Factor | 1 |
| Shaft Seal Material | Nitrile |
| TAP Depth | 0.5 |
| Thrust Rating - output shaft | 806 |
XC1111