Grove Gear GR-B815-60-D 60:1 Ratio, 0.625" Input Diameter, 0.75" Output Diameter, Right Angle Cast Iron Single-Reduction Worm Re
- Write a review
$667.32
AssemblyB-DCenter Distance1.5 In.Center distance (in)1.54Center Distance Range1" thru 3.25"Gear Drive ReductionsSingleGear TypeWormH-Tap Size5/16-18 UNCHousing materialCast ironHP Range1/3 HP or Less (< 1/2)Input Diameter (in)0.625Input HP0.246Input HP @ 1750 RPM0.391Input RPM1750Input StyleSolid Input ShaftMax OHL (Output Shaft)860Max Thrust Load (Output Shaft)1144Model CodeB815Mounting StyleBaseNo. of Gear ReductionsSingleOutputLeft & RightOutput Diameter (in)0.750Output HP0.214Output Key3/16 X 1.50Output RPM29Output ShaftSolid ShaftOutput Shaft Assembly CodeDOutput Shaft DirectionDoubleOutput Shaft OrientationLROutput StyleDOutput Torque462Output Torque (lb-in)313Output Torque Range250 to 500 in lbsOutput typeSolid ShaftOverhung Load860Paint/CoatingBlueProduct LineGR Series - Ironman Worm Gear ReducersProduct TypeWorm Speed ReducerRatio60 to 1Ratio Range60-1ReducerWorm - Right AngleReducer StyleWorm - Right AngleReducer TypeSingleSeriesGR Series - Ironman Worm Gear ReducersSeries CodeGRSeries StyleGR-B-DService Factor1Shaft Seal MaterialVitonTAP Depth0.63Thrust Rating - output shaft1144
Specifications
| Assembly | B-D |
| Center Distance | 1.5 In. |
| Center distance (in) | 1.54 |
| Center Distance Range | 1" thru 3.25" |
| Gear Drive Reductions | Single |
| Gear Type | Worm |
| H-Tap Size | 5/16-18 UNC |
| Housing material | Cast iron |
| HP Range | 1/3 HP or Less (< 1/2) |
| Input Diameter (in) | 0.625 |
| Input HP | 0.246 |
| Input HP @ 1750 RPM | 0.391 |
| Input RPM | 1750 |
| Input Style | Solid Input Shaft |
| Max OHL (Output Shaft) | 860 |
| Max Thrust Load (Output Shaft) | 1144 |
| Model Code | B815 |
| Mounting Style | Base |
| No. of Gear Reductions | Single |
| Output | Left & Right |
| Output Diameter (in) | 0.750 |
| Output HP | 0.214 |
| Output Key | 3/16 X 1.50 |
| Output RPM | 29 |
| Output Shaft | Solid Shaft |
| Output Shaft Assembly Code | D |
| Output Shaft Direction | Double |
| Output Shaft Orientation | LR |
| Output Style | D |
| Output Torque | 462 |
| Output Torque (lb-in) | 313 |
| Output Torque Range | 250 to 500 in lbs |
| Output type | Solid Shaft |
| Overhung Load | 860 |
| Paint/Coating | Blue |
| Product Line | GR Series - Ironman Worm Gear Reducers |
| Product Type | Worm Speed Reducer |
| Ratio | 60 to 1 |
| Ratio Range | 60-1 |
| Reducer | Worm - Right Angle |
| Reducer Style | Worm - Right Angle |
| Reducer Type | Single |
| Series | GR Series - Ironman Worm Gear Reducers |
| Series Code | GR |
| Series Style | GR-B-D |
| Service Factor | 1 |
| Shaft Seal Material | Viton |
| TAP Depth | 0.63 |
| Thrust Rating - output shaft | 1144 |
GR8150034.00