Red Lion Controls CUB5IR00 CUB5I REFLECTIVE

DescriptionThe CUB5 provides the user the ultimate in flexibility, from its complete user programming to the optional setpoint control and communication capability. The CUB5I accepts a DC Current input signal and provides a display in the desired unit of measure. The meter also features minimum and maximum display capture, display offset, units indicator, and programmable user input. The display can be toggled either manually or automatically between the selected displays.The CUB5 display has 0. 48' (12. 2 mm) high digits. The LCD is reflective.The capability of the CUB5 can be easily expanded with the addition of option modules. Setpoint capability is field installable with the addition of the setpoint output modules. Serial communications capability for RS232 or RS485 is added with a serial option module.The CUB5 can be powered from an optional Red Lion Micro-Line/Sensor Power Supply (MLPS1000), which attaches directly to the back of a CUB5. The MLPS1 is powered from 85 to 250 VAC and provides up to 400 mA to drive the unit and sensors.The CUB5I is the DC Current meter. It features 4 current input ranges, that are selected by the user via a programming jumper and software input range selection. The ranges consist of following: 200 µA, 2 mA, 20 mA, or 200 mA. Users should select the appropriate current range that covers their maximum signal input.SpecificationsFour Selectable D. C. Ranges 200 µA, 2 mA, 20 mA, 200 mAMinimum and Maximum Display CaptureReflective Display0. 48" (12. 2 mm) High DigitsOptional Serial Communication Modules (RS-232 or RS-485)Optional Setpoint Cards available (Dual Sink or Relay)Optional USB Programming Card availableOperates from 9 to 28 VDC Power SourceFront Panel or Crimson ProgrammableNEMA 4X/IP65 Sealed Front BezelAccessoriesENC80000ENC8 Steel NEMA 4 Enclosure for CUB4, CUB5 and DT8ENC8A000ENC8A Plastic NEMA 4X Enclosure for CUB4, CUB5 and DT8ENC8B000ENC8B Plastic NEMA 4X Enclosure CUB4, CUB5 and DT8 use with MLPSTCM10000TCM1 Triac Con