TBWOODS AK3512 AK35/HA35 1/2 FHP sheave
- Write a review
$97.33
Belt sectionA-4L-3LBore typeFinished with no keyway, machinableBore-to-size bore diameter0.5Component WR2 (lbs ft2)0.01Datum diameter3.3Dimension0.44Face width0.66Face width (in)0.66Groove cross section sectionAHub location-0.44Hub location (in)-0.44I.D.3.18Inertia WR²2Inside diameter (in)3.18Material typeCIMax RPM7050Number of grooves1O.D.3.55Outside diameter (in)3.55Pitch diameter3.55RPM upper limit7050
Specifications
| Belt section | A-4L-3L |
| Bore type | Finished with no keyway, machinable |
| Bore-to-size bore diameter | 0.5 |
| Component WR2 (lbs ft2) | 0.01 |
| Datum diameter | 3.3 |
| Dimension | 0.44 |
| Face width | 0.66 |
| Face width (in) | 0.66 |
| Groove cross section section | A |
| Hub location | -0.44 |
| Hub location (in) | -0.44 |
| I.D. | 3.18 |
| Inertia WR² | 2 |
| Inside diameter (in) | 3.18 |
| Material type | CI |
| Max RPM | 7050 |
| Number of grooves | 1 |
| O.D. | 3.55 |
| Outside diameter (in) | 3.55 |
| Pitch diameter | 3.55 |
| RPM upper limit | 7050 |
AK3512
