Red Lion Controls P1620000 P-CNTLAC01S

DescriptionThe P1620000 accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. The controller can provide an accurate output control signal (time proportional) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows these controllers to meet a wide variety of application requirements.The controller operates in the PID Control Mode for both heating and cooling, with on-demand auto-tune, that establishes the tuning constants. The PID tuning constants may be fine-tuned through the front panel and then locked out from further modification. The controller employs a unique overshoot suppression feature, that allows the quickest response without excessive overshoot. Switching to Manual Mode provides the operator direct control of the output. The controller may also be programmed to operate in On/Off mode with adjustable hysteresis.The controller is constructed of a lightweight, high impact, black plastic textured case and bezel with a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. In applications that do not require protection to NEMA 4X, multiple controllers can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.SpecificationsPID Control with Reduced OvershootAccepts 0-10V and 0/4-20mA Signals85 to 250 VAC Input PowerOn Demand Auto-Tuning of PID SettingsPC or Front Panel ProgrammingSolid State OutputAccessoriesENC11000ENC11 NEMA 4/IP65 1/16 DIN EnclosureENC11A00ENC11A NEMA 4X/IP65 Enclosure for one 1/16 DIN MeterENC11B00ENC11B NEMA 4X/IP65 Enclosure for two 1/16 DIN MeterENC30000ENC3 Legend/Libra/C48/P48/P16/T16/T48/PXV Enclosure NEMA 1BMK30000BMK3 Base Mount Kit for Legend Libra, T16, P16,