Zero Max 6P26-AC CD CPLG ALUM DOUBLE FLEX CLAMP
- Write a review
$479.61
Angular misalignment3Axial misalignment0.086 inches, 2.2 mmContinuous Rated Torque475 in-lbs, 53 NmDistance Between Shaft Ends (C)1.04 inches, 26.4 mmHub Length (B)1.06 inches, 26.9 mmInertia at 1/2 Max Bore0.70 lb-in, 2.05 kg-cmInertia at Max Bore0.93 lb-in, 2.72 kg-cmInside Diameter of Disc-Pack (H)1.00 inches, 25.4 mmMax Speed9, 500 RPMMaximum Bore (E) with Keyway1.000 inches, 24 mmMaximum Bore (E) without Keyway1.188 inches, 30 mmMaximum Clamp Collar Diameter (F)2.36 inches, 60 mmMaximum Clamp Collar Width (D)0.551 inches, 14 mmOutside Diameter (A)2.60 inches, 66.0 mmOverall Length3.16 inches, 80.3 mmParallel misalignment0.030 inches, 0.76 mmPeak Rated Torque950 in-lbs, 106 NmTorsional stiffness9, 711 Nm/radWeight at 1/2 Max Bore0.95 lbs, 0.43 kgWeight at Max Bore1.06 lbs, 0.48 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.086 inches, 2.2 mm |
| Continuous Rated Torque | 475 in-lbs, 53 Nm |
| Distance Between Shaft Ends (C) | 1.04 inches, 26.4 mm |
| Hub Length (B) | 1.06 inches, 26.9 mm |
| Inertia at 1/2 Max Bore | 0.70 lb-in, 2.05 kg-cm |
| Inertia at Max Bore | 0.93 lb-in, 2.72 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.00 inches, 25.4 mm |
| Max Speed | 9, 500 RPM |
| Maximum Bore (E) with Keyway | 1.000 inches, 24 mm |
| Maximum Bore (E) without Keyway | 1.188 inches, 30 mm |
| Maximum Clamp Collar Diameter (F) | 2.36 inches, 60 mm |
| Maximum Clamp Collar Width (D) | 0.551 inches, 14 mm |
| Outside Diameter (A) | 2.60 inches, 66.0 mm |
| Overall Length | 3.16 inches, 80.3 mm |
| Parallel misalignment | 0.030 inches, 0.76 mm |
| Peak Rated Torque | 950 in-lbs, 106 Nm |
| Torsional stiffness | 9, 711 Nm/rad |
| Weight at 1/2 Max Bore | 0.95 lbs, 0.43 kg |
| Weight at Max Bore | 1.06 lbs, 0.48 kg |
6P26-AC
