Zero Max 6A45-A1C CD CPLG ALUM SERVO HUB STYLE
- Write a review
$509.42
Angular misalignment2Axial misalignment0.091 inches, 2.3 mmClamp Bolt Size (D)M16Clamp Screw to Bore (R)1.71 inches, 43.5 mmClamp Screw to End of Hub (G)0.67 inches, 16.9 mmContinuous Rated Torque2, 500 in-lbs, 282 NmDistance Between Shaft Ends (C)0.50 inches, 12.8 mmHub Length (B)2.36 inches, 60.0 mmInertia at Max Bore24.5 lb-in, 71.6 kg-cmInertia at Min Bore26.4 lb-in, 77.1 kg-cmInside Diameter of Disc-Pack (H)1.81 inches, 46.0 mmMax Speed6, 700 RPMMaximum Bore (E)2.500 inches, 65 mmMinimum Bore (E)1.000 inches, 24 mmOutside Diameter (A)4.84 inches, 123 mmOverall Length5.23 inches, 133 mmParallel misalignment0.015 inches, 0.38 mmPeak Rated Torque5, 000 in-lbs, 564 NmTightening Torque (D)181 ft-lbs, 245 NmTorsional stiffness123, 894 Nm/radWeight at Max Bore6.61 lbs, 3.00 kgWeight at Min Bore8.60 lbs, 3.90 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.091 inches, 2.3 mm |
| Clamp Bolt Size (D) | M16 |
| Clamp Screw to Bore (R) | 1.71 inches, 43.5 mm |
| Clamp Screw to End of Hub (G) | 0.67 inches, 16.9 mm |
| Continuous Rated Torque | 2, 500 in-lbs, 282 Nm |
| Distance Between Shaft Ends (C) | 0.50 inches, 12.8 mm |
| Hub Length (B) | 2.36 inches, 60.0 mm |
| Inertia at Max Bore | 24.5 lb-in, 71.6 kg-cm |
| Inertia at Min Bore | 26.4 lb-in, 77.1 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.81 inches, 46.0 mm |
| Max Speed | 6, 700 RPM |
| Maximum Bore (E) | 2.500 inches, 65 mm |
| Minimum Bore (E) | 1.000 inches, 24 mm |
| Outside Diameter (A) | 4.84 inches, 123 mm |
| Overall Length | 5.23 inches, 133 mm |
| Parallel misalignment | 0.015 inches, 0.38 mm |
| Peak Rated Torque | 5, 000 in-lbs, 564 Nm |
| Tightening Torque (D) | 181 ft-lbs, 245 Nm |
| Torsional stiffness | 123, 894 Nm/rad |
| Weight at Max Bore | 6.61 lbs, 3.00 kg |
| Weight at Min Bore | 8.60 lbs, 3.90 kg |
6A45-A1C
