Zero Max 6P18-A1C CD CPLG ALUM SERVO HUB DBL FLX
- Write a review
$448.00
Angular misalignment2Axial misalignment0.063 inches, 1.6 mmClamp Bolt Size (D)M6Clamp Screw to Bore (R)0.71 inches, 18.0 mmClamp Screw to End of Hub (G)0.29 inches, 7.2 mmContinuous Rated Torque180 in-lbs, 20 NmDistance Between Shaft Ends (C)0.71 inches, 18.0 mmHub Length (B)0.886 inches, 22.5 mmInertia at Max Bore1.03 lb-in, 3.0 kg-cmInertia at Min Bore0.38 lb-in, 1.1 kg-cmInside Diameter of Disc-Pack (H)0.79 inches, 20.1 mmMax Speed15, 000 RPMMaximum Bore (E)1.000 inches, 26 mmMinimum Bore (E)0.375 inches, 8 mmOutside Diameter (A)2.09 inches, 53.0 mmOverall Length2.48 inches, 63.0 mmParallel misalignment0.017 inches, 0.43 mmPeak Rated Torque360 in-lbs, 40 NmTightening Torque (D)115 in-lbs, 13 NmTorsional stiffness5, 500 Nm/radWeight at Max Bore0.55 lbs, 0.25 kgWeight at Min Bore0.66 lbs, 0.30 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.063 inches, 1.6 mm |
| Clamp Bolt Size (D) | M6 |
| Clamp Screw to Bore (R) | 0.71 inches, 18.0 mm |
| Clamp Screw to End of Hub (G) | 0.29 inches, 7.2 mm |
| Continuous Rated Torque | 180 in-lbs, 20 Nm |
| Distance Between Shaft Ends (C) | 0.71 inches, 18.0 mm |
| Hub Length (B) | 0.886 inches, 22.5 mm |
| Inertia at Max Bore | 1.03 lb-in, 3.0 kg-cm |
| Inertia at Min Bore | 0.38 lb-in, 1.1 kg-cm |
| Inside Diameter of Disc-Pack (H) | 0.79 inches, 20.1 mm |
| Max Speed | 15, 000 RPM |
| Maximum Bore (E) | 1.000 inches, 26 mm |
| Minimum Bore (E) | 0.375 inches, 8 mm |
| Outside Diameter (A) | 2.09 inches, 53.0 mm |
| Overall Length | 2.48 inches, 63.0 mm |
| Parallel misalignment | 0.017 inches, 0.43 mm |
| Peak Rated Torque | 360 in-lbs, 40 Nm |
| Tightening Torque (D) | 115 in-lbs, 13 Nm |
| Torsional stiffness | 5, 500 Nm/rad |
| Weight at Max Bore | 0.55 lbs, 0.25 kg |
| Weight at Min Bore | 0.66 lbs, 0.30 kg |
6P18-A1C
