- New
Zero Max C208P CONTROL FLEX COUPLING
- Write a review
$67.74
Distance Between Shaft Ends (L2)0.34 inches, 8.6 mmHub Length (L1)0.219 inches, 5.6 mmInertia (WK)0.0014 lb-in, 0.0029 kg-cmInside Diameter of Disc (D4)0.28 inches, 7.1 mmMax Angular Misalignment1.0Max continuous torque7 in-lbs, 0.79 NmMax Parallel Misalignment0.009 inches, 0.2 mmMax Peak Torque10 in-lbs, 1.13 NmMax Speed10, 000 RPMMaximum Axial Misalignment0.007 inches, 0.2 mmMaximum Bore0.375 inches, 10 mmMinimum Bore0.125 inches, 3 mmOutside Diameter (D2)0.748 inches, 19.0 mmOverall Length0.78 inches, 19.8 mmTorsional stiffness29.8 Nm/rad
Specifications
| Distance Between Shaft Ends (L2) | 0.34 inches, 8.6 mm |
| Hub Length (L1) | 0.219 inches, 5.6 mm |
| Inertia (WK) | 0.0014 lb-in, 0.0029 kg-cm |
| Inside Diameter of Disc (D4) | 0.28 inches, 7.1 mm |
| Max Angular Misalignment | 1.0 |
| Max continuous torque | 7 in-lbs, 0.79 Nm |
| Max Parallel Misalignment | 0.009 inches, 0.2 mm |
| Max Peak Torque | 10 in-lbs, 1.13 Nm |
| Max Speed | 10, 000 RPM |
| Maximum Axial Misalignment | 0.007 inches, 0.2 mm |
| Maximum Bore | 0.375 inches, 10 mm |
| Minimum Bore | 0.125 inches, 3 mm |
| Outside Diameter (D2) | 0.748 inches, 19.0 mm |
| Overall Length | 0.78 inches, 19.8 mm |
| Torsional stiffness | 29.8 Nm/rad |
C208P
