- New
Zero Max C030P CONTROL FLEX COUPLING
- Write a review
$159.87
Distance Between Shaft Ends (L2)0.75 inches, 19.1 mmHub Length (L1)1.00 inches, 25.4 mmInertia (WK)0.69 lb-in, 2.02 kg-cmInside Diameter of Disc (D4)1.13 Inches, 28.6 mmMax Angular Misalignment1.5Max continuous torque250 in-lbs, 28.2 NmMax Parallel Misalignment0.055 inches, 1.4 mmMax Peak Torque361 in-lbs, 40.8 NmMax Speed6, 300 RPMMaximum Axial Misalignment0.042 inches, 1.1 mmMaximum Bore1.000 inches, 25 mmMinimum Bore0.375 inches, 10 mmOutside Diameter (D2)3.00 inches, 76.2 mmOverall Length2.75 inches, 69.9 mmTorsional stiffness486 Nm/rad
Specifications
| Distance Between Shaft Ends (L2) | 0.75 inches, 19.1 mm |
| Hub Length (L1) | 1.00 inches, 25.4 mm |
| Inertia (WK) | 0.69 lb-in, 2.02 kg-cm |
| Inside Diameter of Disc (D4) | 1.13 Inches, 28.6 mm |
| Max Angular Misalignment | 1.5 |
| Max continuous torque | 250 in-lbs, 28.2 Nm |
| Max Parallel Misalignment | 0.055 inches, 1.4 mm |
| Max Peak Torque | 361 in-lbs, 40.8 Nm |
| Max Speed | 6, 300 RPM |
| Maximum Axial Misalignment | 0.042 inches, 1.1 mm |
| Maximum Bore | 1.000 inches, 25 mm |
| Minimum Bore | 0.375 inches, 10 mm |
| Outside Diameter (D2) | 3.00 inches, 76.2 mm |
| Overall Length | 2.75 inches, 69.9 mm |
| Torsional stiffness | 486 Nm/rad |
C030P
