- New
Zero Max 6A26-AC CD CPLG ALUM SINGLE FLEX CLAMP
- Write a review
$342.32
Angular misalignment3Axial misalignment0.043 inches, 1.1 mmContinuous Rated Torque475 in-lbs, 53 NmDistance Between Shaft Ends (C)0.31 inches, 7.9 mmHub Length (B)1.06 inches, 26.9 mmInertia at 1/2 Max Bore0.45 lb-in, 1.32 kg-cmInertia at Max Bore0.68 lb-in, 1.99 kg-cmInside Diameter of Disc-Pack (H)1.00 inches, 25.4 mmMax Speed11, 500 RPMMaximum Bore (E) with Keyway1.000 inches, 24 mmMaximum Bore (E) without Keyway1.188 inches, 30 mmMaximum Clamp Collar Diameter (F)2.36 inches, 60 mmMaximum Clamp Collar Width (D)0.551 inches, 14 mmOutside Diameter (A)2.60 inches, 66.0 mmOverall Length2.43 inches, 61.7 mmParallel misalignment0.008 inches, 0.20 mmPeak Rated Torque950 in-lbs, 106 NmTorsional stiffness20, 100 Nm/radWeight at 1/2 Max Bore0.66 lbs, 0.30 kgWeight at Max Bore0.77 lbs, 0.35 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.043 inches, 1.1 mm |
| Continuous Rated Torque | 475 in-lbs, 53 Nm |
| Distance Between Shaft Ends (C) | 0.31 inches, 7.9 mm |
| Hub Length (B) | 1.06 inches, 26.9 mm |
| Inertia at 1/2 Max Bore | 0.45 lb-in, 1.32 kg-cm |
| Inertia at Max Bore | 0.68 lb-in, 1.99 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.00 inches, 25.4 mm |
| Max Speed | 11, 500 RPM |
| Maximum Bore (E) with Keyway | 1.000 inches, 24 mm |
| Maximum Bore (E) without Keyway | 1.188 inches, 30 mm |
| Maximum Clamp Collar Diameter (F) | 2.36 inches, 60 mm |
| Maximum Clamp Collar Width (D) | 0.551 inches, 14 mm |
| Outside Diameter (A) | 2.60 inches, 66.0 mm |
| Overall Length | 2.43 inches, 61.7 mm |
| Parallel misalignment | 0.008 inches, 0.20 mm |
| Peak Rated Torque | 950 in-lbs, 106 Nm |
| Torsional stiffness | 20, 100 Nm/rad |
| Weight at 1/2 Max Bore | 0.66 lbs, 0.30 kg |
| Weight at Max Bore | 0.77 lbs, 0.35 kg |
6A26-AC
