Zero Max SD005R SIZE 05 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$59.61
Angular misalignment0.5Axial misalignment0.002 inches, 0.05 mmAxial stiffness799 lbs/inch, 140 N/mmClamp Screw Size (M)M2.0, M2.0Clamp Screw to Bore (A2)0.189 Inches, 4.8 mmClamp Screw to End of Hub (C)0.098 Inches, 2.5 mmDistance Between Shaft Ends (DBSE)0.039 in, 1 mmHub Length (LB)0.309 Inches, 7.85 mmInertia0.0009 lb-in, 2.6 x 10 kg-mInside Diameter of Flex Disc (K)0.256 Inches, 6.5 mmMax Speed10, 000 RPMMaximum Bore0.1875 inches, 6 mmMinimum Bore0.125 inches, 3 mmOperating Torque5.3 in-lbs, 0.6 NmOutside diameter0.630 inches, 16 mmOverall Length0.657 Inches, 16.7 mmParallel misalignment0.001 inches, 0.02 mmTightening torque3.5 in-lbs, 0.4 NmTorsional stiffness500 Nm/rad
Specifications
| Angular misalignment | 0.5 |
| Axial misalignment | 0.002 inches, 0.05 mm |
| Axial stiffness | 799 lbs/inch, 140 N/mm |
| Clamp Screw Size (M) | M2.0, M2.0 |
| Clamp Screw to Bore (A2) | 0.189 Inches, 4.8 mm |
| Clamp Screw to End of Hub (C) | 0.098 Inches, 2.5 mm |
| Distance Between Shaft Ends (DBSE) | 0.039 in, 1 mm |
| Hub Length (LB) | 0.309 Inches, 7.85 mm |
| Inertia | 0.0009 lb-in, 2.6 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 0.256 Inches, 6.5 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.1875 inches, 6 mm |
| Minimum Bore | 0.125 inches, 3 mm |
| Operating Torque | 5.3 in-lbs, 0.6 Nm |
| Outside diameter | 0.630 inches, 16 mm |
| Overall Length | 0.657 Inches, 16.7 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Tightening torque | 3.5 in-lbs, 0.4 Nm |
| Torsional stiffness | 500 Nm/rad |
SD005R
