TBWOODS 14S278 14SX2 7/8 SF Flange
- Write a review
$644.51
Bore size2 7/8 inBore size (in)2 7/8Bore tolerance+.0005 to +.0020Bore tolerance (in)+0.0005 to +0.0020Component WR2 (lbs ft2)9.3994Component WR²9.3994Construction typeFinish bore with keywayCoupling size14Dimension (in) (C)4 1/2 inDimension (in) (D)13.875Dimension (in) (H)7-1/2Dimension (in) (S)3/4Dimension (in) (T)2 1/4Dimension (in.) (E)1 1/16Flange diameter13.875Horsepower Rating at 100 RPM69Keyseat (in)3/4 x 3/8Keyseat size3/4 in x 3/8 inLength through bore4.5Material typeHigh strength cast ironMax angular gap misalignment0.242 (in) with EPDM/Neoprene Sleeves and 0.060 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size5Max parallel misalignment21Max RPM2200Max speed2200Min compatible bore size1Outside diameter13.875Power rating at 100 RPM86 kW with EPDM or Neoprene sleeve, 28 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance0.75Setscrew length0.625Setscrew length (in)5/8Setscrew size, location5/8 11 UNC, One over KS and at 90 DegreesSetscrew torque requirement100Setscrew Torque Requirment (ft lbs)100SF flange length2.25SF hub diameter7.5SF hub length23Torque23,400 in-lb with EPDM or Neoprene sleeve, 72,480 in-lb with Hytrel sleeveTorque rate23,400 (in-lbs) with EPDM or Neoprene sleeve; 72,480 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 2 7/8 in |
| Bore size (in) | 2 7/8 |
| Bore tolerance | +.0005 to +.0020 |
| Bore tolerance (in) | +0.0005 to +0.0020 |
| Component WR2 (lbs ft2) | 9.3994 |
| Component WR² | 9.3994 |
| Construction type | Finish bore with keyway |
| Coupling size | 14 |
| Dimension (in) (C) | 4 1/2 in |
| Dimension (in) (D) | 13.875 |
| Dimension (in) (H) | 7-1/2 |
| Dimension (in) (S) | 3/4 |
| Dimension (in) (T) | 2 1/4 |
| Dimension (in.) (E) | 1 1/16 |
| Flange diameter | 13.875 |
| Horsepower Rating at 100 RPM | 69 |
| Keyseat (in) | 3/4 x 3/8 |
| Keyseat size | 3/4 in x 3/8 in |
| Length through bore | 4.5 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.242 (in) with EPDM/Neoprene Sleeves and 0.060 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 5 |
| Max parallel misalignment | 21 |
| Max RPM | 2200 |
| Max speed | 2200 |
| Min compatible bore size | 1 |
| Outside diameter | 13.875 |
| Power rating at 100 RPM | 86 kW with EPDM or Neoprene sleeve, 28 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 0.75 |
| Setscrew length | 0.625 |
| Setscrew length (in) | 5/8 |
| Setscrew size, location | 5/8 11 UNC, One over KS and at 90 Degrees |
| Setscrew torque requirement | 100 |
| Setscrew Torque Requirment (ft lbs) | 100 |
| SF flange length | 2.25 |
| SF hub diameter | 7.5 |
| SF hub length | 23 |
| Torque | 23,400 in-lb with EPDM or Neoprene sleeve, 72,480 in-lb with Hytrel sleeve |
| Torque rate | 23,400 (in-lbs) with EPDM or Neoprene sleeve; 72,480 (in-lbs) with Hytrel sleeve |
14S278