TBWOODS 10S278 10SX2 7/8 SF Flange
- Write a review
$118.72
Bore size2 7/8 inBore size (in)2 7/8Bore tolerance+.0005 to +.0020Bore tolerance (in)+0.0005 to +0.0020Component WR2 (lbs ft2)0.4541Component WR²0.4541Construction typeFinish bore with keywayCoupling size10Dimension (in) (C)2 23/32Dimension (in) (D)7.5Dimension (in) (H)4- 3/8Dimension (in) (S)7/16Dimension (in) (T)1 7/32Dimension (in.) (E)13/16Flange diameter7.5Horsepower Rating at 100 RPM61Keyseat (in)3/4 x 1/4Keyseat size3/4 in x 1/4 inLength through bore2.71875Material typeHigh strength cast ironMax angular gap misalignment0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size3.375Max parallel misalignment12Max RPM3600Max speed3600Min compatible bore size0.4375Outside diameter7.5Power rating at 100 RPM4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance0.4375Setscrew length0.5Setscrew length (in)1/2Setscrew size, location1/2 13 UNC, One over KS and at 90 DegreesSetscrew torque requirement23Setscrew Torque Requirment (ft lbs)23SF flange length1.21875SF hub diameter4.375SF hub length18Torque3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeveTorque rate3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 2 7/8 in |
| Bore size (in) | 2 7/8 |
| Bore tolerance | +.0005 to +.0020 |
| Bore tolerance (in) | +0.0005 to +0.0020 |
| Component WR2 (lbs ft2) | 0.4541 |
| Component WR² | 0.4541 |
| Construction type | Finish bore with keyway |
| Coupling size | 10 |
| Dimension (in) (C) | 2 23/32 |
| Dimension (in) (D) | 7.5 |
| Dimension (in) (H) | 4- 3/8 |
| Dimension (in) (S) | 7/16 |
| Dimension (in) (T) | 1 7/32 |
| Dimension (in.) (E) | 13/16 |
| Flange diameter | 7.5 |
| Horsepower Rating at 100 RPM | 61 |
| Keyseat (in) | 3/4 x 1/4 |
| Keyseat size | 3/4 in x 1/4 in |
| Length through bore | 2.71875 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.128 (in) with EPDM/Neoprene Sleeves and 0.032 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 3.375 |
| Max parallel misalignment | 12 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 0.4375 |
| Outside diameter | 7.5 |
| Power rating at 100 RPM | 4.4 kW with EPDM or Neoprene sleeve, 13 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 0.4375 |
| Setscrew length | 0.5 |
| Setscrew length (in) | 1/2 |
| Setscrew size, location | 1/2 13 UNC, One over KS and at 90 Degrees |
| Setscrew torque requirement | 23 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 1.21875 |
| SF hub diameter | 4.375 |
| SF hub length | 18 |
| Torque | 3,735 in-lb with EPDM or Neoprene sleeve, 11,350 in-lb with Hytrel sleeve |
| Torque rate | 3,735 (in-lbs) with EPDM or Neoprene sleeve; 11,350 (in-lbs) with Hytrel sleeve |
10S278
