Zero Max SD010R SIZE 10 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$60.52
Angular misalignment1Axial misalignment0.004 inches, 0.10 mmAxial stiffness799 lbs/inch, 140 N/mmClamp Screw Size (M)M2)Clamp Screw to Bore (A2)0.228 Inches, 5.8 mmClamp Screw to End of Hub (C)0.124 Inches, 3.15 mmDistance Between Shaft Ends (DBSE)0.041 in, 1.05 mmHub Length (LB)0.360 inches, 9.15 mmInertia0.0019 lb-in, 5.8 x 10 kg-mInside Diameter of Flex Disc (K)0.335 Inches, 8.5 mmMax Speed10, 000 RPMMaximum Bore0.3125 inches, 8 mmMinimum Bore0.125 inches, 3 mmOperating Torque8.9 in-lbs, 1 NmOutside diameter0.748 inches, 19 mmOverall Length0.762 Inches, 19.35 mmParallel misalignment0.001 inches, 0.02 mmTightening torque0.4 Nm/ M2 Screw)Torsional stiffness1, 400 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.004 inches, 0.10 mm |
| Axial stiffness | 799 lbs/inch, 140 N/mm |
| Clamp Screw Size (M) | M2) |
| Clamp Screw to Bore (A2) | 0.228 Inches, 5.8 mm |
| Clamp Screw to End of Hub (C) | 0.124 Inches, 3.15 mm |
| Distance Between Shaft Ends (DBSE) | 0.041 in, 1.05 mm |
| Hub Length (LB) | 0.360 inches, 9.15 mm |
| Inertia | 0.0019 lb-in, 5.8 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 0.335 Inches, 8.5 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.3125 inches, 8 mm |
| Minimum Bore | 0.125 inches, 3 mm |
| Operating Torque | 8.9 in-lbs, 1 Nm |
| Outside diameter | 0.748 inches, 19 mm |
| Overall Length | 0.762 Inches, 19.35 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Tightening torque | 0.4 Nm/ M2 Screw) |
| Torsional stiffness | 1, 400 Nm/rad |
SD010R
