Zero Max SD060R SIZE 60 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$234.84
Angular misalignment1Axial misalignment0.018 inches, 0.45 mmAxial stiffness436 lbs/inch, 76.4 N/mmClamp Screw Size (M)M6, M6Clamp Screw to Bore (A1, Reduced Hub)0.689 in, 17.5 mmClamp Screw to Bore (A2)1.043 Inches, 26.5 mmClamp Screw to End of Hub (C)0.305 Inches, 7.75 mmDistance Between Shaft Ends (DBSE)0.126 in, 3.2 mmHub Length (LB)0.992 Inches, 25.2 mmInertiaSee Catalog, See CatalogInside Diameter of Flex Disc (K)1.220 inches, 31 mmMax Speed10, 000 RPMMaximum Bore1.375 inches, 35 mmMinimum Bore0.4375 inches, 11 mmOperating Torque531 in-lbs, 60 NmOutside diameter2.677 Inches, 68 mmOverall Length2.110 inches, 53.6 mmParallel misalignment0.001 inches, 0.02 mmReduced Hub Diameter (N)1.811 Inches, 46 mmTightening torque124 in-lbs, 14 NmTorsional stiffness70, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.018 inches, 0.45 mm |
| Axial stiffness | 436 lbs/inch, 76.4 N/mm |
| Clamp Screw Size (M) | M6, M6 |
| Clamp Screw to Bore (A1, Reduced Hub) | 0.689 in, 17.5 mm |
| Clamp Screw to Bore (A2) | 1.043 Inches, 26.5 mm |
| Clamp Screw to End of Hub (C) | 0.305 Inches, 7.75 mm |
| Distance Between Shaft Ends (DBSE) | 0.126 in, 3.2 mm |
| Hub Length (LB) | 0.992 Inches, 25.2 mm |
| Inertia | See Catalog, See Catalog |
| Inside Diameter of Flex Disc (K) | 1.220 inches, 31 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 1.375 inches, 35 mm |
| Minimum Bore | 0.4375 inches, 11 mm |
| Operating Torque | 531 in-lbs, 60 Nm |
| Outside diameter | 2.677 Inches, 68 mm |
| Overall Length | 2.110 inches, 53.6 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Reduced Hub Diameter (N) | 1.811 Inches, 46 mm |
| Tightening torque | 124 in-lbs, 14 Nm |
| Torsional stiffness | 70, 000 Nm/rad |
SD060R
