- New
TBWOODS 6SCH1 6SC-HX1 SF HUB
- Write a review
$53.43
Bore size1 inBore size (in)1Bore tolerance+.0005 to +.0015Capscrew sizeQty 4 -- 1/4 x 1-3/4Capscrew size (in)Qty 4 -- 1/4 x 1-3/4Capscrew torque requirement9 in-lbsCapscrew torque requirment (ft lbs)9Component WR2 (lbs ft2)0.0091Component WR²0.0091Construction typeFinish bore with keywayCoupling size6Dimension (in) (C)1 7/32Dimension (in) (H)2-1/2Dimension (in) (S)1/2Horsepower Rating at 100 RPM47Keyseat (in)1/4 x 1/8Keyseat size1/4 in x 1/8 inLength through bore1.21875Material typeHigh strength cast ironMax angular gap misalignment0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size1.875Max parallel misalignment4Max RPM6000Max speed6000Min compatible bore size0.625Power rating at 100 RPM0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeveScrew sizeSetscrewScrew typeHub, spacerSet screw distance0.5Setscrew length0.625Setscrew length (in)5/8Setscrew size, location5/16 18 UNC, over keyseatSetscrew torque requirement13Setscrew Torque Requirment (ft lbs)13SF hub diameter2.5Torque585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeveTorque rate585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 1 in |
| Bore size (in) | 1 |
| Bore tolerance | +.0005 to +.0015 |
| Capscrew size | Qty 4 -- 1/4 x 1-3/4 |
| Capscrew size (in) | Qty 4 -- 1/4 x 1-3/4 |
| Capscrew torque requirement | 9 in-lbs |
| Capscrew torque requirment (ft lbs) | 9 |
| Component WR2 (lbs ft2) | 0.0091 |
| Component WR² | 0.0091 |
| Construction type | Finish bore with keyway |
| Coupling size | 6 |
| Dimension (in) (C) | 1 7/32 |
| Dimension (in) (H) | 2-1/2 |
| Dimension (in) (S) | 1/2 |
| Horsepower Rating at 100 RPM | 47 |
| Keyseat (in) | 1/4 x 1/8 |
| Keyseat size | 1/4 in x 1/8 in |
| Length through bore | 1.21875 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.070 (in) with EPDM/Neoprene Sleeves and 0.016 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 1.875 |
| Max parallel misalignment | 4 |
| Max RPM | 6000 |
| Max speed | 6000 |
| Min compatible bore size | 0.625 |
| Power rating at 100 RPM | 0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Hub, spacer |
| Set screw distance | 0.5 |
| Setscrew length | 0.625 |
| Setscrew length (in) | 5/8 |
| Setscrew size, location | 5/16 18 UNC, over keyseat |
| Setscrew torque requirement | 13 |
| Setscrew Torque Requirment (ft lbs) | 13 |
| SF hub diameter | 2.5 |
| Torque | 585 in-lb with EPDM or Neoprene sleeve, 1,800 in-lb with Hytrel sleeve |
| Torque rate | 585 (in-lbs) with EPDM or Neoprene sleeve; 1,800 (in-lbs) with Hytrel sleeve |
6SCH1
