TBWOODS 9S32MM 9SX32MM SF Flange
- Write a review
$94.97
Bore size32 mmBore size (mm)32 mmBore tolerance+.025 to +.050Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.2170Component WR²0.217Construction typeFinish bore with keywayCoupling size9Dimension (in) (C)2 13/32Dimension (in) (D)6.35Dimension (in) (H)3 5/8Dimension (in) (S)3/8Dimension (in) (T)1 1/32Dimension (in.) (E)25/32Flange diameter6.35Horsepower Rating at 100 RPM57Keyseat (mm)10mm x 3.3mmKeyseat size10 mm x 3.3 mmLength through bore61Material typeHigh strength cast ironMax angular gap misalignment2.80 (mm) with EPDM/Neoprene Sleeves and 0.71 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size73Max parallel misalignment11Max RPM3750Max speed3750Min compatible bore size12Outside diameter161Power rating at 100 RPM2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance13Setscrew length10Setscrew length (mm)10 mmSetscrew size, locationM10 x 1.50, One over KS and at 90 DegreesSetscrew torque requirement31Setscrew Torque Requirment (ft lbs)23SF flange length26SF hub diameter98SF hub length20Torque264 Nm with EPDM or Neoprene sleeve, 814 Nm with Hytrel sleeveTorque rate264 (Nm) with EPDM or Neoprene sleeve; 814 (Nm) with Hytrel sleeve
Specifications
| Bore size | 32 mm |
| Bore size (mm) | 32 mm |
| Bore tolerance | +.025 to +.050 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.2170 |
| Component WR² | 0.217 |
| Construction type | Finish bore with keyway |
| Coupling size | 9 |
| Dimension (in) (C) | 2 13/32 |
| Dimension (in) (D) | 6.35 |
| Dimension (in) (H) | 3 5/8 |
| Dimension (in) (S) | 3/8 |
| Dimension (in) (T) | 1 1/32 |
| Dimension (in.) (E) | 25/32 |
| Flange diameter | 6.35 |
| Horsepower Rating at 100 RPM | 57 |
| Keyseat (mm) | 10mm x 3.3mm |
| Keyseat size | 10 mm x 3.3 mm |
| Length through bore | 61 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 2.80 (mm) with EPDM/Neoprene Sleeves and 0.71 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 73 |
| Max parallel misalignment | 11 |
| Max RPM | 3750 |
| Max speed | 3750 |
| Min compatible bore size | 12 |
| Outside diameter | 161 |
| Power rating at 100 RPM | 2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 13 |
| Setscrew length | 10 |
| Setscrew length (mm) | 10 mm |
| Setscrew size, location | M10 x 1.50, One over KS and at 90 Degrees |
| Setscrew torque requirement | 31 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 26 |
| SF hub diameter | 98 |
| SF hub length | 20 |
| Torque | 264 Nm with EPDM or Neoprene sleeve, 814 Nm with Hytrel sleeve |
| Torque rate | 264 (Nm) with EPDM or Neoprene sleeve; 814 (Nm) with Hytrel sleeve |
9S32MM
