Zero Max 6A22-AC CD CPLG ALUM SINGLE FLEX CLAMP
- Write a review
$330.58
Angular misalignment3Axial misalignment0.036 inches, 0.9 mmContinuous Rated Torque270 in-lbs, 30 NmDistance Between Shaft Ends (C)0.31 inches, 7.9 mmHub Length (B)1.00 inches, 25.4 mmInertia at 1/2 Max Bore0.31 lb-in, 0.91 kg-cmInertia at Max Bore0.50 lb-in, 1.46 kg-cmInside Diameter of Disc-Pack (H)0.98 inches, 24.9 mmMax Speed13, 500 RPMMaximum Bore (E) with Keyway0.750 inches, 20 mmMaximum Bore (E) without Keyway0.938 inches, 25 mmMaximum Clamp Collar Diameter (F)2.21 inches, 56 mmMaximum Clamp Collar Width (D)0.551 inches, 14 mmOutside Diameter (A)2.25 inches, 57.2 mmOverall Length2.31 inches, 58.7 mmParallel misalignment0.006 inches, 0.15 mmPeak Rated Torque540 in-lbs, 60 NmTorsional stiffness17, 352 Nm/radWeight at 1/2 Max Bore0.51 lbs, 0.23 kgWeight at Max Bore0.67 lbs, 0.30 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.036 inches, 0.9 mm |
| Continuous Rated Torque | 270 in-lbs, 30 Nm |
| Distance Between Shaft Ends (C) | 0.31 inches, 7.9 mm |
| Hub Length (B) | 1.00 inches, 25.4 mm |
| Inertia at 1/2 Max Bore | 0.31 lb-in, 0.91 kg-cm |
| Inertia at Max Bore | 0.50 lb-in, 1.46 kg-cm |
| Inside Diameter of Disc-Pack (H) | 0.98 inches, 24.9 mm |
| Max Speed | 13, 500 RPM |
| Maximum Bore (E) with Keyway | 0.750 inches, 20 mm |
| Maximum Bore (E) without Keyway | 0.938 inches, 25 mm |
| Maximum Clamp Collar Diameter (F) | 2.21 inches, 56 mm |
| Maximum Clamp Collar Width (D) | 0.551 inches, 14 mm |
| Outside Diameter (A) | 2.25 inches, 57.2 mm |
| Overall Length | 2.31 inches, 58.7 mm |
| Parallel misalignment | 0.006 inches, 0.15 mm |
| Peak Rated Torque | 540 in-lbs, 60 Nm |
| Torsional stiffness | 17, 352 Nm/rad |
| Weight at 1/2 Max Bore | 0.51 lbs, 0.23 kg |
| Weight at Max Bore | 0.67 lbs, 0.30 kg |
6A22-AC
