- New
TBWOODS 9S1716 9SX1 7/16 SF Flange
- Write a review
$89.04
Bore size1 7/16 inBore size (in)1-7/16Bore tolerance+.0005 to +.0015Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.2187Component WR²0.2187Construction typeFinish bore with keywayCoupling size9Dimension (in) (C)2 13/32Dimension (in) (D)6.35Dimension (in) (H)3 5/8Dimension (in) (S)3/8Dimension (in) (T)1 1/32Dimension (in.) (E)25/32Flange diameter6.35Horsepower Rating at 100 RPM57Keyseat (in)3/8 x 3/16Keyseat size3/8 in x 3/16 inLength through bore2.40625Material typeHigh strength cast ironMax angular gap misalignment0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size2.875Max parallel misalignment11Max RPM3750Max speed3750Min compatible bore size0.4375Outside diameter6.35Power rating at 100 RPM2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance0.375Setscrew length1Setscrew length (in)1Setscrew size, location3/8 16 UNC, One over KS and at 90 DegreesSetscrew torque requirement23Setscrew Torque Requirment (ft lbs)23SF flange length1.03125SF hub diameter3.625SF hub length25/32Torque2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeveTorque rate2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 1 7/16 in |
| Bore size (in) | 1-7/16 |
| Bore tolerance | +.0005 to +.0015 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.2187 |
| Component WR² | 0.2187 |
| Construction type | Finish bore with keyway |
| Coupling size | 9 |
| Dimension (in) (C) | 2 13/32 |
| Dimension (in) (D) | 6.35 |
| Dimension (in) (H) | 3 5/8 |
| Dimension (in) (S) | 3/8 |
| Dimension (in) (T) | 1 1/32 |
| Dimension (in.) (E) | 25/32 |
| Flange diameter | 6.35 |
| Horsepower Rating at 100 RPM | 57 |
| Keyseat (in) | 3/8 x 3/16 |
| Keyseat size | 3/8 in x 3/16 in |
| Length through bore | 2.40625 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 2.875 |
| Max parallel misalignment | 11 |
| Max RPM | 3750 |
| Max speed | 3750 |
| Min compatible bore size | 0.4375 |
| Outside diameter | 6.35 |
| Power rating at 100 RPM | 2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 0.375 |
| Setscrew length | 1 |
| Setscrew length (in) | 1 |
| Setscrew size, location | 3/8 16 UNC, One over KS and at 90 Degrees |
| Setscrew torque requirement | 23 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 1.03125 |
| SF hub diameter | 3.625 |
| SF hub length | 25/32 |
| Torque | 2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeve |
| Torque rate | 2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve |
9S1716
