Zero Max 6A30-AC CD CPLG ALUM SINGLE FLEX CLAMP
- Write a review
$348.65
Angular misalignment3Axial misalignment0.050 inches, 1.3 mmContinuous Rated Torque800 in-lbs, 90 NmDistance Between Shaft Ends (C)0.46 inches, 11.7 mmHub Length (B)1.25 inches, 31.8 mmInertia at 1/2 Max Bore1.04 lb-in, 3.04 kg-cmInertia at Max Bore1.78 lb-in, 5.21 kg-cmInside Diameter of Disc-Pack (H)1.21 inches, 31 mmMax Speed9, 500 RPMMaximum Bore (E) with Keyway1.125 inches, 30 mmMaximum Bore (E) without Keyway1.375 inches, 35 mmMaximum Clamp Collar Diameter (F)2.92 inches, 74 mmMaximum Clamp Collar Width (D)0.709 inches, 18 mmOutside Diameter (A)3.00 inches, 76.2 mmOverall Length2.96 inches, 75.2 mmParallel misalignment0.010 inches, 0.30 mmPeak Rated Torque1, 600 in-lbs, 180 NmTorsional stiffness42, 976 Nm/radWeight at 1/2 Max Bore1.03 lbs, 0.47 kgWeight at Max Bore1.46 lbs, 0.66 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.050 inches, 1.3 mm |
| Continuous Rated Torque | 800 in-lbs, 90 Nm |
| Distance Between Shaft Ends (C) | 0.46 inches, 11.7 mm |
| Hub Length (B) | 1.25 inches, 31.8 mm |
| Inertia at 1/2 Max Bore | 1.04 lb-in, 3.04 kg-cm |
| Inertia at Max Bore | 1.78 lb-in, 5.21 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.21 inches, 31 mm |
| Max Speed | 9, 500 RPM |
| Maximum Bore (E) with Keyway | 1.125 inches, 30 mm |
| Maximum Bore (E) without Keyway | 1.375 inches, 35 mm |
| Maximum Clamp Collar Diameter (F) | 2.92 inches, 74 mm |
| Maximum Clamp Collar Width (D) | 0.709 inches, 18 mm |
| Outside Diameter (A) | 3.00 inches, 76.2 mm |
| Overall Length | 2.96 inches, 75.2 mm |
| Parallel misalignment | 0.010 inches, 0.30 mm |
| Peak Rated Torque | 1, 600 in-lbs, 180 Nm |
| Torsional stiffness | 42, 976 Nm/rad |
| Weight at 1/2 Max Bore | 1.03 lbs, 0.47 kg |
| Weight at Max Bore | 1.46 lbs, 0.66 kg |
6A30-AC
