- New
TBWOODS 8S48MM 8SX48MM SF FLANGE
- Write a review
$59.36
Bore size48 mmBore size (mm)48mmBore tolerance+.025 to +.050Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.1041Component WR²0.1041Construction typeFinish bore with keywayCoupling size8Dimension (in) (C)2 3/32Dimension (in) (D)5.45Dimension (in) (H)3-1/4Dimension (in) (S)3/8Dimension (in) (T)29/32Dimension (in.) (E)3/4Flange diameter5.45Horsepower Rating at 100 RPM52Keyseat (mm)14mm x 3.8mmKeyseat size14 mm x 3.8 mmLength through bore53Material typeHigh strength cast ironMax angular gap misalignment2.39 (mm) with EPDM/Neoprene Sleeves and 0.64 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size60Max parallel misalignment8Max RPM4500Max speed4500Min compatible bore size12Outside diameter138Power rating at 100 RPM1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance12Setscrew length10Setscrew length (mm)10 mmSetscrew size, locationM10 x 1.50, One over KS and at 90 DegreesSetscrew torque requirement31Setscrew Torque Requirment (ft lbs)23SF flange length23SF hub diameter83SF hub length19Torque167 Nm with EPDM or Neoprene sleeve, 512 Nm with Hytrel sleeveTorque rate167 (Nm) with EPDM or Neoprene sleeve; 512 (Nm) with Hytrel sleeve
Specifications
| Bore size | 48 mm |
| Bore size (mm) | 48mm |
| Bore tolerance | +.025 to +.050 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.1041 |
| Component WR² | 0.1041 |
| Construction type | Finish bore with keyway |
| Coupling size | 8 |
| Dimension (in) (C) | 2 3/32 |
| Dimension (in) (D) | 5.45 |
| Dimension (in) (H) | 3-1/4 |
| Dimension (in) (S) | 3/8 |
| Dimension (in) (T) | 29/32 |
| Dimension (in.) (E) | 3/4 |
| Flange diameter | 5.45 |
| Horsepower Rating at 100 RPM | 52 |
| Keyseat (mm) | 14mm x 3.8mm |
| Keyseat size | 14 mm x 3.8 mm |
| Length through bore | 53 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 2.39 (mm) with EPDM/Neoprene Sleeves and 0.64 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 60 |
| Max parallel misalignment | 8 |
| Max RPM | 4500 |
| Max speed | 4500 |
| Min compatible bore size | 12 |
| Outside diameter | 138 |
| Power rating at 100 RPM | 1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 12 |
| Setscrew length | 10 |
| Setscrew length (mm) | 10 mm |
| Setscrew size, location | M10 x 1.50, One over KS and at 90 Degrees |
| Setscrew torque requirement | 31 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 23 |
| SF hub diameter | 83 |
| SF hub length | 19 |
| Torque | 167 Nm with EPDM or Neoprene sleeve, 512 Nm with Hytrel sleeve |
| Torque rate | 167 (Nm) with EPDM or Neoprene sleeve; 512 (Nm) with Hytrel sleeve |
8S48MM
