- New
TBWOODS 8SC5010 8SC50-10 SF Flange
- Write a review
$142.47
Component WR2 (lbs ft2)0.1300Component WR²0.13Coupling size8Dimension (in) (D)5.45Dimension (in) (H)4 3/8Dimension (in) (L)2 3/8Dimension (in) (T)29/32Dimension (in.) (E)1 1/32Distance betewwn shaft (in)5Distance between shaft5Flange diameter5.45Horsepower Rating at 100 RPM52Length60Length through bore2.375Material typeHigh strength cast ironMax angular gap misalignment0.094 (in) with EPDM/Neoprene Sleeves and 0.025 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size2.375Max parallel misalignment8Max RPM4500Max speed4500Min compatible bore size0.4375Outside diameter5.45Power rating at 100 RPM1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeveScrew typeFlange, SpacerSF flange length0.90625SF hub diameter4.375SF hub length22Spacer hub required10SCH x Bore Spacer HubTorque1,475 in-lb with EPDM or Neoprene sleeve, 4,530 in-lb with Hytrel sleeveTorque rate1,475 (in-lbs) with EPDM or Neoprene sleeve; 4,530 (in-lbs) with Hytrel sleeve
Specifications
| Component WR2 (lbs ft2) | 0.1300 |
| Component WR² | 0.13 |
| Coupling size | 8 |
| Dimension (in) (D) | 5.45 |
| Dimension (in) (H) | 4 3/8 |
| Dimension (in) (L) | 2 3/8 |
| Dimension (in) (T) | 29/32 |
| Dimension (in.) (E) | 1 1/32 |
| Distance betewwn shaft (in) | 5 |
| Distance between shaft | 5 |
| Flange diameter | 5.45 |
| Horsepower Rating at 100 RPM | 52 |
| Length | 60 |
| Length through bore | 2.375 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.094 (in) with EPDM/Neoprene Sleeves and 0.025 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 2.375 |
| Max parallel misalignment | 8 |
| Max RPM | 4500 |
| Max speed | 4500 |
| Min compatible bore size | 0.4375 |
| Outside diameter | 5.45 |
| Power rating at 100 RPM | 1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeve |
| Screw type | Flange, Spacer |
| SF flange length | 0.90625 |
| SF hub diameter | 4.375 |
| SF hub length | 22 |
| Spacer hub required | 10SCH x Bore Spacer Hub |
| Torque | 1,475 in-lb with EPDM or Neoprene sleeve, 4,530 in-lb with Hytrel sleeve |
| Torque rate | 1,475 (in-lbs) with EPDM or Neoprene sleeve; 4,530 (in-lbs) with Hytrel sleeve |
8SC5010
