- New
TBWOODS 8S1316 8SX1 3/16 SF FLANGE
- Write a review
$63.81
Bore size1 3/16 inBore size (in)1-3/16Bore tolerance+.0005 to +.0015Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.1041Component WR²0.1041Construction typeFinish bore with keywayCoupling size8Dimension (in) (C)2 3/32Dimension (in) (D)5.45Dimension (in) (H)3-1/4Dimension (in) (S)3/8Dimension (in) (T)29/32Dimension (in.) (E)3/4Flange diameter5.45Horsepower Rating at 100 RPM52Keyseat (in)1/4 x 1/8Keyseat size1/4 in x 1/8 inLength through bore2.09375Material typeHigh strength cast ironMax angular gap misalignment0.094 (in) with EPDM/Neoprene Sleeves and 0.025 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size2.375Max parallel misalignment8Max RPM4500Max speed4500Min compatible bore size0.4375Outside diameter5.45Power rating at 100 RPM1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance0.375Setscrew length0.75Setscrew length (in)3/4Setscrew size, location3/8 16 UNC, One over KS and at 90 DegreesSetscrew torque requirement23Setscrew Torque Requirment (ft lbs)23SF flange length0.90625SF hub diameter3.25SF hub length3/4Torque1,475 in-lb with EPDM or Neoprene sleeve, 4,530 in-lb with Hytrel sleeveTorque rate1,475 (in-lbs) with EPDM or Neoprene sleeve; 4,530 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 1 3/16 in |
| Bore size (in) | 1-3/16 |
| Bore tolerance | +.0005 to +.0015 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.1041 |
| Component WR² | 0.1041 |
| Construction type | Finish bore with keyway |
| Coupling size | 8 |
| Dimension (in) (C) | 2 3/32 |
| Dimension (in) (D) | 5.45 |
| Dimension (in) (H) | 3-1/4 |
| Dimension (in) (S) | 3/8 |
| Dimension (in) (T) | 29/32 |
| Dimension (in.) (E) | 3/4 |
| Flange diameter | 5.45 |
| Horsepower Rating at 100 RPM | 52 |
| Keyseat (in) | 1/4 x 1/8 |
| Keyseat size | 1/4 in x 1/8 in |
| Length through bore | 2.09375 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.094 (in) with EPDM/Neoprene Sleeves and 0.025 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 2.375 |
| Max parallel misalignment | 8 |
| Max RPM | 4500 |
| Max speed | 4500 |
| Min compatible bore size | 0.4375 |
| Outside diameter | 5.45 |
| Power rating at 100 RPM | 1.8 kW with EPDM or Neoprene sleeve, 5.4 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 0.375 |
| Setscrew length | 0.75 |
| Setscrew length (in) | 3/4 |
| Setscrew size, location | 3/8 16 UNC, One over KS and at 90 Degrees |
| Setscrew torque requirement | 23 |
| Setscrew Torque Requirment (ft lbs) | 23 |
| SF flange length | 0.90625 |
| SF hub diameter | 3.25 |
| SF hub length | 3/4 |
| Torque | 1,475 in-lb with EPDM or Neoprene sleeve, 4,530 in-lb with Hytrel sleeve |
| Torque rate | 1,475 (in-lbs) with EPDM or Neoprene sleeve; 4,530 (in-lbs) with Hytrel sleeve |
8S1316
