- New
TBWOODS 9SC44 SF Flange
- Write a review
$124.65
Component WR2 (lbs ft2)0.1930Component WR²0.193Coupling size9Dimension (in) (D)6.35Dimension (in) (H)3 5/8Dimension (in) (L)2 1/16Dimension (in) (T)1 1/32Dimension (in.) (E)7/16Distance betewwn shaft (in)4 3/8Distance between shaft4.375Flange diameter6.35Horsepower Rating at 100 RPM57Length52Length through bore2.0625Material typeHigh strength cast ironMax angular gap misalignment0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size2.875Max parallel misalignment11Max RPM3750Max speed3750Min compatible bore size0.4375Outside diameter6.35Power rating at 100 RPM2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeveScrew typeFlange, SpacerSF flange length1.03125SF hub diameter3.625SF hub length7/16Spacer hub required9SCH x Bore Spacer HubTorque2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeveTorque rate2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve
Specifications
| Component WR2 (lbs ft2) | 0.1930 |
| Component WR² | 0.193 |
| Coupling size | 9 |
| Dimension (in) (D) | 6.35 |
| Dimension (in) (H) | 3 5/8 |
| Dimension (in) (L) | 2 1/16 |
| Dimension (in) (T) | 1 1/32 |
| Dimension (in.) (E) | 7/16 |
| Distance betewwn shaft (in) | 4 3/8 |
| Distance between shaft | 4.375 |
| Flange diameter | 6.35 |
| Horsepower Rating at 100 RPM | 57 |
| Length | 52 |
| Length through bore | 2.0625 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.109 (in) with EPDM/Neoprene Sleeves and 0.028 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 2.875 |
| Max parallel misalignment | 11 |
| Max RPM | 3750 |
| Max speed | 3750 |
| Min compatible bore size | 0.4375 |
| Outside diameter | 6.35 |
| Power rating at 100 RPM | 2.8 kW with EPDM or Neoprene sleeve, 8.5 kW with Hytrel sleeve |
| Screw type | Flange, Spacer |
| SF flange length | 1.03125 |
| SF hub diameter | 3.625 |
| SF hub length | 7/16 |
| Spacer hub required | 9SCH x Bore Spacer Hub |
| Torque | 2,340 in-lb with EPDM or Neoprene sleeve, 7,200 in-lb with Hytrel sleeve |
| Torque rate | 2,340 (in-lbs) with EPDM or Neoprene sleeve; 7,200 (in-lbs) with Hytrel sleeve |
9SC44
