- New
Zero Max SC010R SIZE 10 DOUBLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$66.84
Angular misalignment1Axial misalignment0.008 inches, 0.20 mmAxial stiffness400 lbs/inch, 70 N/mmClamp Screw Size (M)M2)Clamp Screw to Bore (A2)0.228 Inches, 5.8 mmClamp Screw to End of Hub (C)0.124 Inches, 3.15 mmDistance Between Shaft Ends (DBSE)0.299 in, 7.6 mmHub Length (LB)0.360 inches, 9.15 mmInertia0.0027 lb-in, 8.0 x 10 kg-mInside Diameter of Flex Disc (K)0.335 Inches, 8.5 mmMax Speed10, 000 RPMMaximum Bore0.3125 inches, 8 mmMinimum Bore0.125 inches, 3 mmOperating Torque8.9 in-lbs, 1 NmOutside diameter0.748 inches, 19 mmOverall Length1.020 Inches, 25.9 mmParallel misalignment0.004 inches, 0.11 mmTightening torque0.4 Nm/ M2 Screw)Torsional stiffness700 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.008 inches, 0.20 mm |
| Axial stiffness | 400 lbs/inch, 70 N/mm |
| Clamp Screw Size (M) | M2) |
| Clamp Screw to Bore (A2) | 0.228 Inches, 5.8 mm |
| Clamp Screw to End of Hub (C) | 0.124 Inches, 3.15 mm |
| Distance Between Shaft Ends (DBSE) | 0.299 in, 7.6 mm |
| Hub Length (LB) | 0.360 inches, 9.15 mm |
| Inertia | 0.0027 lb-in, 8.0 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 0.335 Inches, 8.5 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.3125 inches, 8 mm |
| Minimum Bore | 0.125 inches, 3 mm |
| Operating Torque | 8.9 in-lbs, 1 Nm |
| Outside diameter | 0.748 inches, 19 mm |
| Overall Length | 1.020 Inches, 25.9 mm |
| Parallel misalignment | 0.004 inches, 0.11 mm |
| Tightening torque | 0.4 Nm/ M2 Screw) |
| Torsional stiffness | 700 Nm/rad |
SC010R
