- New
Zero Max SD100R SIZE 100 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$492.26
Angular misalignment1Axial misalignment0.030 inches, 0.74 mmAxial stiffness664 lbs/inch, 111 N/mmClamp Screw Size (M)M8, M8Clamp Screw to Bore (A2)1.535 Inches, 39 mmClamp Screw to End of Hub (C)0.354 Inches, 9 mmDistance Between Shaft Ends (DBSE)0.386 in, 9.8 mmHub Length (LB)1.181 Inches, 30 mmInertia6.36 lb-in, 1.858 x 10 kg-mInside Diameter of Flex Disc (K)1.890 Inches, 48 mmMax Speed10, 000 RPMMaximum Bore1.750 inches, 45 mmMinimum Bore1.3125 inches, 32 mmOperating Torque2, 213 in-lbs, 250 NmOutside diameter4.095 Inches, 104 mmOverall Length2.748 Inches, 69.8 mmParallel misalignment0.001 inches, 0.02 mmTightening torque266 in-lbs, 30 NmTorsional stiffness120, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.030 inches, 0.74 mm |
| Axial stiffness | 664 lbs/inch, 111 N/mm |
| Clamp Screw Size (M) | M8, M8 |
| Clamp Screw to Bore (A2) | 1.535 Inches, 39 mm |
| Clamp Screw to End of Hub (C) | 0.354 Inches, 9 mm |
| Distance Between Shaft Ends (DBSE) | 0.386 in, 9.8 mm |
| Hub Length (LB) | 1.181 Inches, 30 mm |
| Inertia | 6.36 lb-in, 1.858 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 1.890 Inches, 48 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 1.750 inches, 45 mm |
| Minimum Bore | 1.3125 inches, 32 mm |
| Operating Torque | 2, 213 in-lbs, 250 Nm |
| Outside diameter | 4.095 Inches, 104 mm |
| Overall Length | 2.748 Inches, 69.8 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Tightening torque | 266 in-lbs, 30 Nm |
| Torsional stiffness | 120, 000 Nm/rad |
SD100R
