TBWOODS 11C238 11CX2 3/8 SF Flange
- Write a review
$412.12
Bore size2 3/8 inBore size (in)2 3/8Bore tolerance+.0005 to +.0020Bore tolerance (in)+0.0005 to +0.0020Capscrew size4Capscrew size (in)1/2 20 NF X 2Capscrew torque requirement16Capscrew torque requirment (ft lbs)130Component WR2 (lbs ft2)1.2099Component WR²1.2099Construction typeFinish bore with keywayCoupling size11Dimension (in) (C)4Dimension (in) (D)8.625Dimension (in) (H)5.375Dimension (in) (S)5/8Dimension (in.) (E)2.5Flange diameter8.625Horsepower Rating at 100 RPM9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeveKeyseat (in)5/8 x 5/16Keyseat size5/8 in x 5/16 inLength through bore4Material typeHigh strength cast ironMax angular gap misalignment0.151 (in) with EPDM/Neoprene Sleeves and 0.037 (in) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size3.875Max parallel misalignment15Max RPM3600Max speed3600Min compatible bore size0.5Outside diameter8.625Power rating at 100 RPM7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, ClampSet screw distance0.625Setscrew length1Setscrew length (in)1Setscrew size, location5/16 18 UNC, over keyseatSetscrew torque requirement13Setscrew Torque Requirment (ft lbs)13SF flange length1.5SF hub diameter5.375SF hub length43Torque5,890 in-lb with EPDM or Neoprene sleeve, 18,000 in-lb with Hytrel sleeveTorque rate5,890 (in-lbs) with EPDM or Neoprene sleeve; 18,000 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 2 3/8 in |
| Bore size (in) | 2 3/8 |
| Bore tolerance | +.0005 to +.0020 |
| Bore tolerance (in) | +0.0005 to +0.0020 |
| Capscrew size | 4 |
| Capscrew size (in) | 1/2 20 NF X 2 |
| Capscrew torque requirement | 16 |
| Capscrew torque requirment (ft lbs) | 130 |
| Component WR2 (lbs ft2) | 1.2099 |
| Component WR² | 1.2099 |
| Construction type | Finish bore with keyway |
| Coupling size | 11 |
| Dimension (in) (C) | 4 |
| Dimension (in) (D) | 8.625 |
| Dimension (in) (H) | 5.375 |
| Dimension (in) (S) | 5/8 |
| Dimension (in.) (E) | 2.5 |
| Flange diameter | 8.625 |
| Horsepower Rating at 100 RPM | 9.4 HP with EPDM or Neoprene sleeve, 29 HP with Hytrel sleeve |
| Keyseat (in) | 5/8 x 5/16 |
| Keyseat size | 5/8 in x 5/16 in |
| Length through bore | 4 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 0.151 (in) with EPDM/Neoprene Sleeves and 0.037 (in) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 3.875 |
| Max parallel misalignment | 15 |
| Max RPM | 3600 |
| Max speed | 3600 |
| Min compatible bore size | 0.5 |
| Outside diameter | 8.625 |
| Power rating at 100 RPM | 7.0 kW with EPDM or Neoprene sleeve, 21 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Clamp |
| Set screw distance | 0.625 |
| Setscrew length | 1 |
| Setscrew length (in) | 1 |
| Setscrew size, location | 5/16 18 UNC, over keyseat |
| Setscrew torque requirement | 13 |
| Setscrew Torque Requirment (ft lbs) | 13 |
| SF flange length | 1.5 |
| SF hub diameter | 5.375 |
| SF hub length | 43 |
| Torque | 5,890 in-lb with EPDM or Neoprene sleeve, 18,000 in-lb with Hytrel sleeve |
| Torque rate | 5,890 (in-lbs) with EPDM or Neoprene sleeve; 18,000 (in-lbs) with Hytrel sleeve |
11C238
