- New
TBWOODS 6S35MM 6SX35MM SF FLANGE
- Write a review
$41.19
Bore size35 mmBore size (mm)35mmBore tolerance+.025 to +.050Bore tolerance (in)+0.0005 to +0.0015Component WR2 (lbs ft2)0.0286Component WR²0.0286Construction typeFinish bore with keywayCoupling size6Dimension (in) (C)1-5/8Dimension (in) (D)4.00Dimension (in) (H)2-1/2Dimension (in) (S)5/16Dimension (in) (T)25/32Dimension (in.) (E)17/32Flange diameter4Horsepower Rating at 100 RPM47Keyseat (mm)10mm x 3.3mmKeyseat size10 mm x 3.3 mmLength through bore41Material typeHigh strength cast ironMax angular gap misalignment1.78 (mm) with EPDM/Neoprene Sleeves and 0.41 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size47Max parallel misalignment4Max RPM6000Max speed6000Min compatible bore size16Outside diameter102Power rating at 100 RPM0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance10Setscrew length8Setscrew length (mm)8mmSetscrew size, locationM8 x 1.25, one over KS and at 90 degreesSetscrew torque requirement18Setscrew Torque Requirment (ft lbs)13SF flange length20SF hub diameter64SF hub length13Torque66 Nm with EPDM or Neoprene sleeve, 203 Nm with Hytrel sleeveTorque rate66 (Nm) with EPDM or Neoprene sleeve; 203 (Nm) with Hytrel sleeve
Specifications
| Bore size | 35 mm |
| Bore size (mm) | 35mm |
| Bore tolerance | +.025 to +.050 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Component WR2 (lbs ft2) | 0.0286 |
| Component WR² | 0.0286 |
| Construction type | Finish bore with keyway |
| Coupling size | 6 |
| Dimension (in) (C) | 1-5/8 |
| Dimension (in) (D) | 4.00 |
| Dimension (in) (H) | 2-1/2 |
| Dimension (in) (S) | 5/16 |
| Dimension (in) (T) | 25/32 |
| Dimension (in.) (E) | 17/32 |
| Flange diameter | 4 |
| Horsepower Rating at 100 RPM | 47 |
| Keyseat (mm) | 10mm x 3.3mm |
| Keyseat size | 10 mm x 3.3 mm |
| Length through bore | 41 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 1.78 (mm) with EPDM/Neoprene Sleeves and 0.41 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 47 |
| Max parallel misalignment | 4 |
| Max RPM | 6000 |
| Max speed | 6000 |
| Min compatible bore size | 16 |
| Outside diameter | 102 |
| Power rating at 100 RPM | 0.69 kW with EPDM or Neoprene sleeve, 2.1 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 10 |
| Setscrew length | 8 |
| Setscrew length (mm) | 8mm |
| Setscrew size, location | M8 x 1.25, one over KS and at 90 degrees |
| Setscrew torque requirement | 18 |
| Setscrew Torque Requirment (ft lbs) | 13 |
| SF flange length | 20 |
| SF hub diameter | 64 |
| SF hub length | 13 |
| Torque | 66 Nm with EPDM or Neoprene sleeve, 203 Nm with Hytrel sleeve |
| Torque rate | 66 (Nm) with EPDM or Neoprene sleeve; 203 (Nm) with Hytrel sleeve |
6S35MM
