Zero Max C216P CONTROL FLEX COUPLING
- Write a review
$78.58
Distance Between Shaft Ends (L2)0.69 Inches, 17.5 mmHub Length (L1)0.394 inches, 10.0 mmInertia (WK)0.039 lb-in, 0.114 kg-cmInside Diameter of Disc (D4)0.56 inches, 14.2 mmMax Angular Misalignment1.0Max continuous torque57 in-lbs, 6.44 NmMax Parallel Misalignment0.019 inches, 0.5 mmMax Peak Torque81 in-lbs, 9.15 NmMax Speed7, 000 RPMMaximum Axial Misalignment0.014 inches, 0.4 mmMaximum Bore0.750 inches, 20 mmMinimum Bore0.125 inches, 4 mmOutside Diameter (D2)1.457 inches, 37.0 mmOverall Length1.48 inches, 37.6 mmTorsional stiffness203 Nm/rad
Specifications
| Distance Between Shaft Ends (L2) | 0.69 Inches, 17.5 mm |
| Hub Length (L1) | 0.394 inches, 10.0 mm |
| Inertia (WK) | 0.039 lb-in, 0.114 kg-cm |
| Inside Diameter of Disc (D4) | 0.56 inches, 14.2 mm |
| Max Angular Misalignment | 1.0 |
| Max continuous torque | 57 in-lbs, 6.44 Nm |
| Max Parallel Misalignment | 0.019 inches, 0.5 mm |
| Max Peak Torque | 81 in-lbs, 9.15 Nm |
| Max Speed | 7, 000 RPM |
| Maximum Axial Misalignment | 0.014 inches, 0.4 mm |
| Maximum Bore | 0.750 inches, 20 mm |
| Minimum Bore | 0.125 inches, 4 mm |
| Outside Diameter (D2) | 1.457 inches, 37.0 mm |
| Overall Length | 1.48 inches, 37.6 mm |
| Torsional stiffness | 203 Nm/rad |
C216P
