- New
Zero Max C016P 6MM X 16MM CONTROL FLEX COUPLING
- Write a review
$0.00
Distance Between Shaft Ends (L2)0.38 inches, 9.7 mmHub Length (L1)0.394 inches, 10.0 mmInertia (WK)0.038 lb-in, 0.111 kg-cmInside Diameter of Disc (D4)0.56 inches, 14.2 mmMax Angular Misalignment1.5Max continuous torque31 in-lbs, 3.50 NmMax Parallel Misalignment0.028 inches, 0.7 mmMax Peak Torque45 in-lbs, 5.08 NmMax Speed8, 000 RPMMaximum Axial Misalignment0.021 inches, 0.5 mmMaximum Bore0.750 inches, 20 mmMinimum Bore0.125 inches, 4 mmOutside Diameter (D2)1.457 inches, 37.0 mmOverall Length1.17 inches, 29.7 mmTorsional stiffness106 Nm/rad
Specifications
| Distance Between Shaft Ends (L2) | 0.38 inches, 9.7 mm |
| Hub Length (L1) | 0.394 inches, 10.0 mm |
| Inertia (WK) | 0.038 lb-in, 0.111 kg-cm |
| Inside Diameter of Disc (D4) | 0.56 inches, 14.2 mm |
| Max Angular Misalignment | 1.5 |
| Max continuous torque | 31 in-lbs, 3.50 Nm |
| Max Parallel Misalignment | 0.028 inches, 0.7 mm |
| Max Peak Torque | 45 in-lbs, 5.08 Nm |
| Max Speed | 8, 000 RPM |
| Maximum Axial Misalignment | 0.021 inches, 0.5 mm |
| Maximum Bore | 0.750 inches, 20 mm |
| Minimum Bore | 0.125 inches, 4 mm |
| Outside Diameter (D2) | 1.457 inches, 37.0 mm |
| Overall Length | 1.17 inches, 29.7 mm |
| Torsional stiffness | 106 Nm/rad |
C016P
