- New
Zero Max SD040R SIZE 40 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$83.10
Angular misalignment1Axial misalignment0.012 inches, 0.30 mmAxial stiffness457 lbs/inch, 80 N/mmClamp Screw Size (M)M4, M4Clamp Screw to Bore (A1, Reduced Hub)0.433 in, 11 mmClamp Screw to Bore (A2)0.669 Inches, 17 mmClamp Screw to End of Hub (C)0.177 Inches, 4.5 mmDistance Between Shaft Ends (DBSE)0.118 in, 3 mmHub Length (LB)0.610 Inches, 15.5 mmInertiaSee Catalog, See CatalogInside Diameter of Flex Disc (K)0.768 Inches, 19.5 mmMax Speed10, 000 RPMMaximum Bore0.9375 inches, 24 mmMinimum Bore0.3125 inches, 8 mmOperating Torque89 in-lbs, 10 NmOutside diameter1.732 Inches, 44 mmOverall Length1.339 inches, 34 mmParallel misalignment0.001 inches, 0.02 mmReduced Hub Diameter (N)1.165 Inches, 29.6 mmTightening torque30 in-lbs, 3.4 NmTorsional stiffness20, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.012 inches, 0.30 mm |
| Axial stiffness | 457 lbs/inch, 80 N/mm |
| Clamp Screw Size (M) | M4, M4 |
| Clamp Screw to Bore (A1, Reduced Hub) | 0.433 in, 11 mm |
| Clamp Screw to Bore (A2) | 0.669 Inches, 17 mm |
| Clamp Screw to End of Hub (C) | 0.177 Inches, 4.5 mm |
| Distance Between Shaft Ends (DBSE) | 0.118 in, 3 mm |
| Hub Length (LB) | 0.610 Inches, 15.5 mm |
| Inertia | See Catalog, See Catalog |
| Inside Diameter of Flex Disc (K) | 0.768 Inches, 19.5 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.9375 inches, 24 mm |
| Minimum Bore | 0.3125 inches, 8 mm |
| Operating Torque | 89 in-lbs, 10 Nm |
| Outside diameter | 1.732 Inches, 44 mm |
| Overall Length | 1.339 inches, 34 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Reduced Hub Diameter (N) | 1.165 Inches, 29.6 mm |
| Tightening torque | 30 in-lbs, 3.4 Nm |
| Torsional stiffness | 20, 000 Nm/rad |
SD040R
