- New
Zero Max 6A45-SS STAINLESS CD CPLG SET SCREW
- Write a review
$962.84
Angular misalignment3Axial misalignment0.090 inches, 2.3 mmContinuous Rated Torque2, 500 in-lbs, 282 NmDistance Between Shaft Ends (C)0.58 inches, 14.7 mmHub Body Diameter (Ga)2.69 inches, 68.3 mmHub Length (B)1.69 inches, 42.9 mmInertia at Max Bore (A Hubs)14.6 lb-in, 42.7 kg-cmInside Diameter of Disc-Pack (H)1.81 inches, 46 mmMax Speed6, 100 RPMMaximum Bore (Ea)1.625 inches, 42 mmOutside Diameter (A)4.50 inches, 114 mmOverall Length3.96 inches, 101 mmParallel misalignment0.015 inches, 0.40 mmPeak Rated Torque5, 000 in-lbs, 564 NmTorsional stiffness123, 909 Nm/radWeight at Max Bore (A Hubs)6.40 lbs, 2.90 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.090 inches, 2.3 mm |
| Continuous Rated Torque | 2, 500 in-lbs, 282 Nm |
| Distance Between Shaft Ends (C) | 0.58 inches, 14.7 mm |
| Hub Body Diameter (Ga) | 2.69 inches, 68.3 mm |
| Hub Length (B) | 1.69 inches, 42.9 mm |
| Inertia at Max Bore (A Hubs) | 14.6 lb-in, 42.7 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.81 inches, 46 mm |
| Max Speed | 6, 100 RPM |
| Maximum Bore (Ea) | 1.625 inches, 42 mm |
| Outside Diameter (A) | 4.50 inches, 114 mm |
| Overall Length | 3.96 inches, 101 mm |
| Parallel misalignment | 0.015 inches, 0.40 mm |
| Peak Rated Torque | 5, 000 in-lbs, 564 Nm |
| Torsional stiffness | 123, 909 Nm/rad |
| Weight at Max Bore (A Hubs) | 6.40 lbs, 2.90 kg |
6A45-SS
