- New
Zero Max SD050R SIZE 50 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$142.71
Angular misalignment1Axial misalignment0.016 inches, 0.40 mmAxial stiffness274 lbs/inch, 48 N/mmClamp Screw Size (M)M5, M5Clamp Screw to Bore (A1, Reduced Hub)0.571 in, 14.5 mmClamp Screw to Bore (A2)0.866 inches, 22 mmClamp Screw to End of Hub (C)0.236 Inches, 6 mmDistance Between Shaft Ends (DBSE)0.094 in, 2.4 mmHub Length (LB)0.807 Inches, 20.5 mmInertiaSee Catalog, See CatalogInside Diameter of Flex Disc (K)1.024 Inches, 26 mmMax Speed10, 000 RPMMaximum Bore1.1875 inches, 30 mmMinimum Bore0.375 inches, 8 mmOperating Torque221 in-lbs, 25 NmOutside diameter2.205 inches, 56 mmOverall Length1.709 Inches, 43.4 mmParallel misalignment0.001 inches, 0.02 mmReduced Hub Diameter (N)1.496 Inches, 38 mmTightening torque62 in-lbs, 7 NmTorsional stiffness32, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.016 inches, 0.40 mm |
| Axial stiffness | 274 lbs/inch, 48 N/mm |
| Clamp Screw Size (M) | M5, M5 |
| Clamp Screw to Bore (A1, Reduced Hub) | 0.571 in, 14.5 mm |
| Clamp Screw to Bore (A2) | 0.866 inches, 22 mm |
| Clamp Screw to End of Hub (C) | 0.236 Inches, 6 mm |
| Distance Between Shaft Ends (DBSE) | 0.094 in, 2.4 mm |
| Hub Length (LB) | 0.807 Inches, 20.5 mm |
| Inertia | See Catalog, See Catalog |
| Inside Diameter of Flex Disc (K) | 1.024 Inches, 26 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 1.1875 inches, 30 mm |
| Minimum Bore | 0.375 inches, 8 mm |
| Operating Torque | 221 in-lbs, 25 Nm |
| Outside diameter | 2.205 inches, 56 mm |
| Overall Length | 1.709 Inches, 43.4 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Reduced Hub Diameter (N) | 1.496 Inches, 38 mm |
| Tightening torque | 62 in-lbs, 7 Nm |
| Torsional stiffness | 32, 000 Nm/rad |
SD050R
