Zero Max 6P30-A1C CD CPLG ALUM SERVO HUB DBL FLX
- Write a review
$484.13
Angular misalignment2Axial misalignment0.102 inches, 2.6 mmClamp Bolt Size (D)M10Clamp Screw to Bore (R)1.09 inches, 27.8 mmClamp Screw to End of Hub (G)0.39 inches, 10.0 mmContinuous Rated Torque800 in-lbs, 90 NmDistance Between Shaft Ends (C)1.34 inches, 34.0 mmHub Length (B)1.28 inches, 32.5 mmInertia at Max Bore3.42 lb-in 2, 10.0 kg-cmInertia at Min Bore3.76 lb-in, 11.0 kg-cmInside Diameter of Disc-Pack (H)1.21 inches, 31 mmMax Speed9, 500 RPMMaximum Bore (E)1.500 inches, 40 mmMinimum Bore (E)0.688 Inches, 16 mmOutside Diameter (A)3.23 inches, 82.0 mmOverall Length3.90 inches, 99.0 mmParallel misalignment0.033 inches, 0.84 mmPeak Rated Torque1, 600 in-lbs, 180 NmTightening Torque (D)513 in-lbs, 58 NmTorsional stiffness20, 923 Nm/radWeight at Max Bore2.14 lbs, 0.97 kgWeight at Min Bore2.51 lbs, 1.14 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.102 inches, 2.6 mm |
| Clamp Bolt Size (D) | M10 |
| Clamp Screw to Bore (R) | 1.09 inches, 27.8 mm |
| Clamp Screw to End of Hub (G) | 0.39 inches, 10.0 mm |
| Continuous Rated Torque | 800 in-lbs, 90 Nm |
| Distance Between Shaft Ends (C) | 1.34 inches, 34.0 mm |
| Hub Length (B) | 1.28 inches, 32.5 mm |
| Inertia at Max Bore | 3.42 lb-in 2, 10.0 kg-cm |
| Inertia at Min Bore | 3.76 lb-in, 11.0 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.21 inches, 31 mm |
| Max Speed | 9, 500 RPM |
| Maximum Bore (E) | 1.500 inches, 40 mm |
| Minimum Bore (E) | 0.688 Inches, 16 mm |
| Outside Diameter (A) | 3.23 inches, 82.0 mm |
| Overall Length | 3.90 inches, 99.0 mm |
| Parallel misalignment | 0.033 inches, 0.84 mm |
| Peak Rated Torque | 1, 600 in-lbs, 180 Nm |
| Tightening Torque (D) | 513 in-lbs, 58 Nm |
| Torsional stiffness | 20, 923 Nm/rad |
| Weight at Max Bore | 2.14 lbs, 0.97 kg |
| Weight at Min Bore | 2.51 lbs, 1.14 kg |
6P30-A1C
