- New
Zero Max 6A37-A1C CD CPLG ALUM SERVO STYLE HUB
- Write a review
$398.32
Angular misalignment2Axial misalignment0.071 inches, 1.8 mmClamp Bolt Size (D)M12Clamp Screw to Bore (R)1.42 inches, 36.0 mmClamp Screw to End of Hub (G)0.50 inches, 12.7 mmContinuous Rated Torque1, 600 in-lbs, 181 NmDistance Between Shaft Ends (C)0.44 inches, 11.2 mmHub Length (B)1.81 inches, 46.0 mmInertia at Max Bore8.65 lb-in, 25.3 kg-cmInertia at Min Bore9.26 lb-in, 27.1 kg-cmInside Diameter of Disc-Pack (H)1.51 inches, 38.4 mmMax Speed8, 000 RPMMaximum Bore (E)2.000 inches, 51 mmMinimum Bore (E)0.750 inches, 18 mmOutside Diameter (A)3.98 inches, 101 mmOverall Length4.06 inches, 103 mmParallel misalignment0.013 inches, 0.33 mmPeak Rated Torque3, 200 in-lbs, 362 NmTightening Torque (D)74 ft-lbs, 100 NmTorsional stiffness67, 158 Nm/radWeight at Max Bore3.51 lbs, 1.59 kgWeight at Min Bore4.50 lbs, 2.04 kg
Specifications
| Angular misalignment | 2 |
| Axial misalignment | 0.071 inches, 1.8 mm |
| Clamp Bolt Size (D) | M12 |
| Clamp Screw to Bore (R) | 1.42 inches, 36.0 mm |
| Clamp Screw to End of Hub (G) | 0.50 inches, 12.7 mm |
| Continuous Rated Torque | 1, 600 in-lbs, 181 Nm |
| Distance Between Shaft Ends (C) | 0.44 inches, 11.2 mm |
| Hub Length (B) | 1.81 inches, 46.0 mm |
| Inertia at Max Bore | 8.65 lb-in, 25.3 kg-cm |
| Inertia at Min Bore | 9.26 lb-in, 27.1 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.51 inches, 38.4 mm |
| Max Speed | 8, 000 RPM |
| Maximum Bore (E) | 2.000 inches, 51 mm |
| Minimum Bore (E) | 0.750 inches, 18 mm |
| Outside Diameter (A) | 3.98 inches, 101 mm |
| Overall Length | 4.06 inches, 103 mm |
| Parallel misalignment | 0.013 inches, 0.33 mm |
| Peak Rated Torque | 3, 200 in-lbs, 362 Nm |
| Tightening Torque (D) | 74 ft-lbs, 100 Nm |
| Torsional stiffness | 67, 158 Nm/rad |
| Weight at Max Bore | 3.51 lbs, 1.59 kg |
| Weight at Min Bore | 4.50 lbs, 2.04 kg |
6A37-A1C
