- New
Zero Max 6P60-AC CD CPLG ALUM DOUBLE FLEX CLAMP
- Write a review
$1,092.00
Angular misalignment3Axial misalignment0.260 inches, 6.6 mmContinuous Rated Torque6, 350 in-lbs, 718 NmDistance Between Shaft Ends (C)2.41 inches, 61.2 mmHub Length (B)2.44 inches, 62.0 mmInertia at 1/2 Max Bore46.2 lb-in, 135 kg-cmInertia at Max Bore58.2 lb-in, 170 kg-cmInside Diameter of Disc-Pack (H)2.42 inches, 61 mmMax Speed4, 400 RPMMaximum Bore (E) with Keyway2.625 inches, 70 mmMaximum Bore (E) without Keyway3.000 inches, 75 mmMaximum Clamp Collar Diameter (F)5.71 inches, 145 mmMaximum Clamp Collar Width (D)1.339 inches, 34 mmOutside Diameter (A)6.00 inches, 152 mmOverall Length7.29 inches, 185 mmParallel misalignment0.069 inches, 1.8 mmPeak Rated Torque12, 700 in-lbs, 1, 436 NmTorsional stiffness130, 743 Nm/radWeight at 1/2 Max Bore10.7 lbs, 4.85 kgWeight at Max Bore12.8 lbs, 5.81 kg
Specifications
| Angular misalignment | 3 |
| Axial misalignment | 0.260 inches, 6.6 mm |
| Continuous Rated Torque | 6, 350 in-lbs, 718 Nm |
| Distance Between Shaft Ends (C) | 2.41 inches, 61.2 mm |
| Hub Length (B) | 2.44 inches, 62.0 mm |
| Inertia at 1/2 Max Bore | 46.2 lb-in, 135 kg-cm |
| Inertia at Max Bore | 58.2 lb-in, 170 kg-cm |
| Inside Diameter of Disc-Pack (H) | 2.42 inches, 61 mm |
| Max Speed | 4, 400 RPM |
| Maximum Bore (E) with Keyway | 2.625 inches, 70 mm |
| Maximum Bore (E) without Keyway | 3.000 inches, 75 mm |
| Maximum Clamp Collar Diameter (F) | 5.71 inches, 145 mm |
| Maximum Clamp Collar Width (D) | 1.339 inches, 34 mm |
| Outside Diameter (A) | 6.00 inches, 152 mm |
| Overall Length | 7.29 inches, 185 mm |
| Parallel misalignment | 0.069 inches, 1.8 mm |
| Peak Rated Torque | 12, 700 in-lbs, 1, 436 Nm |
| Torsional stiffness | 130, 743 Nm/rad |
| Weight at 1/2 Max Bore | 10.7 lbs, 4.85 kg |
| Weight at Max Bore | 12.8 lbs, 5.81 kg |
6P60-AC
