- New
Zero Max SD090R SIZE 90 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$418.19
Angular misalignment1Axial misalignment0.030 inches, 0.65 mmAxial stiffness616 lbs/inch, 108 N/mmClamp Screw Size (M)M8, M8Clamp Screw to Bore (A2)1.339 inches, 34 mmClamp Screw to End of Hub (C)0.354 Inches, 9 mmDistance Between Shaft Ends (DBSE)0.327 in, 8.3 mmHub Length (LB)1.181 Inches, 30 mmInertia4.20 lb-in, 1.227 x 10 kg-mInside Diameter of Flex Disc (K)1.654 Inches, 42 mmMax Speed10, 000 RPMMaximum Bore1.750 inches, 45 mmMinimum Bore1.000 inches, 25 mmOperating Torque1, 593 in-lbs, 180 NmOutside diameter3.622 Inches, 94 mmOverall Length2.689 Inches, 68.3 mmParallel misalignment0.001 inches, 0.02 mmTightening torque266 in-lbs, 30 NmTorsional stiffness100, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.030 inches, 0.65 mm |
| Axial stiffness | 616 lbs/inch, 108 N/mm |
| Clamp Screw Size (M) | M8, M8 |
| Clamp Screw to Bore (A2) | 1.339 inches, 34 mm |
| Clamp Screw to End of Hub (C) | 0.354 Inches, 9 mm |
| Distance Between Shaft Ends (DBSE) | 0.327 in, 8.3 mm |
| Hub Length (LB) | 1.181 Inches, 30 mm |
| Inertia | 4.20 lb-in, 1.227 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 1.654 Inches, 42 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 1.750 inches, 45 mm |
| Minimum Bore | 1.000 inches, 25 mm |
| Operating Torque | 1, 593 in-lbs, 180 Nm |
| Outside diameter | 3.622 Inches, 94 mm |
| Overall Length | 2.689 Inches, 68.3 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Tightening torque | 266 in-lbs, 30 Nm |
| Torsional stiffness | 100, 000 Nm/rad |
SD090R
