Zero Max SD035R SIZE 35 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$74.06
Angular misalignment1Axial misalignment0.010 inches, 0.25 mmAxial stiffness640 lbs/inch, 112 N/mmClamp Screw Size (M)M4, M4Clamp Screw to Bore (A2)0.551 inches, 14 mmClamp Screw to End of Hub (C)0.177 Inches, 4.5 mmDistance Between Shaft Ends (DBSE)0.118 in, 3 mmHub Length (LB)0.610 Inches, 15.5 mmInertia0.063 lb-in, 1.84 x 10 kg-mInside Diameter of Flex Disc (K)0.669 Inches, 17 mmMax Speed10, 000 RPMMaximum Bore0.750 inches, 19 mmMinimum Bore0.250 inches, 6 mmOperating Torque71 in-lbs, 8 NmOutside diameter1.535 Inches, 39 mmOverall Length1.339 inches, 34 mmParallel misalignment0.001 inches, 0.02 mmTightening torque30 in-lbs, 3.4 NmTorsional stiffness18, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.010 inches, 0.25 mm |
| Axial stiffness | 640 lbs/inch, 112 N/mm |
| Clamp Screw Size (M) | M4, M4 |
| Clamp Screw to Bore (A2) | 0.551 inches, 14 mm |
| Clamp Screw to End of Hub (C) | 0.177 Inches, 4.5 mm |
| Distance Between Shaft Ends (DBSE) | 0.118 in, 3 mm |
| Hub Length (LB) | 0.610 Inches, 15.5 mm |
| Inertia | 0.063 lb-in, 1.84 x 10 kg-m |
| Inside Diameter of Flex Disc (K) | 0.669 Inches, 17 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.750 inches, 19 mm |
| Minimum Bore | 0.250 inches, 6 mm |
| Operating Torque | 71 in-lbs, 8 Nm |
| Outside diameter | 1.535 Inches, 39 mm |
| Overall Length | 1.339 inches, 34 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Tightening torque | 30 in-lbs, 3.4 Nm |
| Torsional stiffness | 18, 000 Nm/rad |
SD035R
