Zero Max 6A30 CD CPLG SINGLE FLEX SET SCREW
- Write a review
$287.23
A Hub Body Diameter (Ga)1.71 inches, 43.4 mmAngular misalignment3Axial misalignment0.050 inches, 1.3 mmB Hub Body Diameter (Gb)2.50 inches, 63.5 mmContinuous Rated Torque800 in-lbs, 90 NmDistance Between Shaft Ends (C)0.46 inches, 11.7 mmHub Length (B)1.25 inches, 31.8 mmInertia at Max Bore (A Hubs)1.90 lb-in, 5.56 kg-cmInertia at Max Bore (B Hubs)2.80 lb-in, 8.19 kg-cmInside Diameter of Disc-Pack (H)1.21 inches, 31 mmMax Speed9, 000 RPMMaximum Bore (Ea) A Hub1.000 inches, 25 mmMaximum Bore (Eb) B Hub1.375 inches, 35 mmOutside Diameter (A)3.00 inches, 76.2 mmOverall Length2.96 inches, 75.2 mmParallel misalignment0.010 inches, 0.30 mmPeak Rated Torque1, 600 in-lbs, 180 NmTorsional stiffness42, 976 Nm/radWeight at Max Bore (A Hubs)2.00 lbs, 0.91 kgWeight at Max Bore (B Hubs)2.50 lbs, 1.13 kg
Specifications
| A Hub Body Diameter (Ga) | 1.71 inches, 43.4 mm |
| Angular misalignment | 3 |
| Axial misalignment | 0.050 inches, 1.3 mm |
| B Hub Body Diameter (Gb) | 2.50 inches, 63.5 mm |
| Continuous Rated Torque | 800 in-lbs, 90 Nm |
| Distance Between Shaft Ends (C) | 0.46 inches, 11.7 mm |
| Hub Length (B) | 1.25 inches, 31.8 mm |
| Inertia at Max Bore (A Hubs) | 1.90 lb-in, 5.56 kg-cm |
| Inertia at Max Bore (B Hubs) | 2.80 lb-in, 8.19 kg-cm |
| Inside Diameter of Disc-Pack (H) | 1.21 inches, 31 mm |
| Max Speed | 9, 000 RPM |
| Maximum Bore (Ea) A Hub | 1.000 inches, 25 mm |
| Maximum Bore (Eb) B Hub | 1.375 inches, 35 mm |
| Outside Diameter (A) | 3.00 inches, 76.2 mm |
| Overall Length | 2.96 inches, 75.2 mm |
| Parallel misalignment | 0.010 inches, 0.30 mm |
| Peak Rated Torque | 1, 600 in-lbs, 180 Nm |
| Torsional stiffness | 42, 976 Nm/rad |
| Weight at Max Bore (A Hubs) | 2.00 lbs, 0.91 kg |
| Weight at Max Bore (B Hubs) | 2.50 lbs, 1.13 kg |
6A30
