TBWOODS 7S19MM 7SX19MM SF FLANGE
- Write a review
$47.49
Bore size19 mmBore size (mm)19 mmBore tolerance+.020 to +.041Bore tolerance (in)+0.0005 to +0.0015Bushing required1008Component WR2 (lbs ft2)0.0471Component WR²0.0471Construction typeFinish bore with keywayCoupling size7Dimension (in) (C)1 27/32Dimension (in) (D)4.625Dimension (in) (H)2 13/16Dimension (in) (S)3/8Dimension (in) (T)11/16Dimension (in.) (E)1Flange diameter4.625Horsepower Rating at 100 RPM50Keyseat (mm)6mm x 2.8mmKeyseat size6 mm x 2.8 mmLength through bore47Material typeHigh strength cast ironMax angular gap misalignment2.06 (mm) with EPDM/Neoprene Sleeves and 0.51 (mm) with Hytrel SleevesMax angular misalignment1° with EPDM/neoprene sleeves and 1/4° with hytrel sleevesMax compatible bore size47Max parallel misalignment7Max RPM5250Max speed5250Min compatible bore size16Outside diameter117Power rating at 100 RPM1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeveScrew sizeSetscrewScrew typeFlange, Type SSet screw distance10Setscrew length10Setscrew length (mm)10 mmSetscrew size, locationM8 x 1.25, one over KS and at 90 degreesSetscrew torque requirement18Setscrew Torque Requirment (ft lbs)13SF flange length20SF hub diameter71SF hub length17Torque940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeveTorque rate940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve
Specifications
| Bore size | 19 mm |
| Bore size (mm) | 19 mm |
| Bore tolerance | +.020 to +.041 |
| Bore tolerance (in) | +0.0005 to +0.0015 |
| Bushing required | 1008 |
| Component WR2 (lbs ft2) | 0.0471 |
| Component WR² | 0.0471 |
| Construction type | Finish bore with keyway |
| Coupling size | 7 |
| Dimension (in) (C) | 1 27/32 |
| Dimension (in) (D) | 4.625 |
| Dimension (in) (H) | 2 13/16 |
| Dimension (in) (S) | 3/8 |
| Dimension (in) (T) | 11/16 |
| Dimension (in.) (E) | 1 |
| Flange diameter | 4.625 |
| Horsepower Rating at 100 RPM | 50 |
| Keyseat (mm) | 6mm x 2.8mm |
| Keyseat size | 6 mm x 2.8 mm |
| Length through bore | 47 |
| Material type | High strength cast iron |
| Max angular gap misalignment | 2.06 (mm) with EPDM/Neoprene Sleeves and 0.51 (mm) with Hytrel Sleeves |
| Max angular misalignment | 1° with EPDM/neoprene sleeves and 1/4° with hytrel sleeves |
| Max compatible bore size | 47 |
| Max parallel misalignment | 7 |
| Max RPM | 5250 |
| Max speed | 5250 |
| Min compatible bore size | 16 |
| Outside diameter | 117 |
| Power rating at 100 RPM | 1.1 kW with EPDM or Neoprene sleeve, 3.4 kW with Hytrel sleeve |
| Screw size | Setscrew |
| Screw type | Flange, Type S |
| Set screw distance | 10 |
| Setscrew length | 10 |
| Setscrew length (mm) | 10 mm |
| Setscrew size, location | M8 x 1.25, one over KS and at 90 degrees |
| Setscrew torque requirement | 18 |
| Setscrew Torque Requirment (ft lbs) | 13 |
| SF flange length | 20 |
| SF hub diameter | 71 |
| SF hub length | 17 |
| Torque | 940 in-lb with EPDM or Neoprene sleeve, 2,875 in-lb with Hytrel sleeve |
| Torque rate | 940 (in-lbs) with EPDM or Neoprene sleeve; 2,875 (in-lbs) with Hytrel sleeve |
7S19MM
