- New
Zero Max SD030R SIZE 30 SINGLE FLEX SERVO COUPLING WITH STAINLESS STEEL FLEX ELEMENTS
- Write a review
$68.65
Angular misalignment1Axial misalignment0.008 inches, 0.20 mmAxial stiffness366 lbs/inch, 64 N/mmClamp Screw Size (M)M3, M3Clamp Screw to Bore (A1, Reduced Hub)0.315 in, 8 mmClamp Screw to Bore (A2)0.492 Inches, 12.5 mmClamp Screw to End of Hub (C)0.148 Inches, 3.75 mmDistance Between Shaft Ends (DBSE)0.098 in, 2.5 mmHub Length (LB)0.488 Inches, 12.4 mmInertiaSee Catalog, See CatalogInside Diameter of Flex Disc (K)0.571 Inches, 14.5 mmMax Speed10, 000 RPMMaximum Bore0.625 inches, 16 mmMinimum Bore0.1875 inches, 5 mmOperating Torque44 in-lbs, 5 NmOutside diameter1.339 inches, 34 mmOverall Length1.075 Inches, 27.3 mmParallel misalignment0.001 inches, 0.02 mmReduced Hub Diameter (N)0.850 Inches, 21.6 mmTightening torque13 in-lbs, 1.5 NmTorsional stiffness8, 000 Nm/rad
Specifications
| Angular misalignment | 1 |
| Axial misalignment | 0.008 inches, 0.20 mm |
| Axial stiffness | 366 lbs/inch, 64 N/mm |
| Clamp Screw Size (M) | M3, M3 |
| Clamp Screw to Bore (A1, Reduced Hub) | 0.315 in, 8 mm |
| Clamp Screw to Bore (A2) | 0.492 Inches, 12.5 mm |
| Clamp Screw to End of Hub (C) | 0.148 Inches, 3.75 mm |
| Distance Between Shaft Ends (DBSE) | 0.098 in, 2.5 mm |
| Hub Length (LB) | 0.488 Inches, 12.4 mm |
| Inertia | See Catalog, See Catalog |
| Inside Diameter of Flex Disc (K) | 0.571 Inches, 14.5 mm |
| Max Speed | 10, 000 RPM |
| Maximum Bore | 0.625 inches, 16 mm |
| Minimum Bore | 0.1875 inches, 5 mm |
| Operating Torque | 44 in-lbs, 5 Nm |
| Outside diameter | 1.339 inches, 34 mm |
| Overall Length | 1.075 Inches, 27.3 mm |
| Parallel misalignment | 0.001 inches, 0.02 mm |
| Reduced Hub Diameter (N) | 0.850 Inches, 21.6 mm |
| Tightening torque | 13 in-lbs, 1.5 Nm |
| Torsional stiffness | 8, 000 Nm/rad |
SD030R
