SKF LMCG 1/0.4 Grid and Gear Coupling Grease
- Write a review
$21.73
AGMA CodeCG-2Available for Single Point LubricationnoBase Oil TypeMineralBase Oil Viscosity DIN 51562 at 100 °C44 mm²/sBase Oil Viscosity DIN 51562 at 40 °C761 mm²/sColourBrownCopper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C1bCorrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl2 - 2Density (DIN 51757) at 20 °C (68 ºf)0.94 g/cm³DIN 51825 CodeGOG1G-0Dropping Point (min) ISO 2176160 °CEP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N0.5 mmEP Performance - 4 Ball - Weld Load (min.) DIN 51350/43200 NFlow pressure, DIN 51805-2<1400 mBar at -10°CNLGI Consistency Class1Operating Temperature Range0-120 °CPack Height238 mmPack Length55 mmPack Width55 mmPacksize420 ml cartridgePenetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm25Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm)310-340Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C700 at 220°CShelf Life5 yearThickenerPolyethyleneWater wash-out test, ISO 11009<10% at 38 °C
Specifications
| AGMA Code | CG-2 |
| Available for Single Point Lubrication | no |
| Base Oil Type | Mineral |
| Base Oil Viscosity DIN 51562 at 100 °C | 44 mm²/s |
| Base Oil Viscosity DIN 51562 at 40 °C | 761 mm²/s |
| Colour | Brown |
| Copper corrosion (max.) DIN 51811 /ASTM D4048, 24 hrs at 100°C | 1b |
| Corrosion protection, Emcor, ISO 11007 modified, 0.5% NaCl | 2 - 2 |
| Density (DIN 51757) at 20 °C (68 ºf) | 0.94 g/cm³ |
| DIN 51825 Code | GOG1G-0 |
| Dropping Point (min) ISO 2176 | 160 °C |
| EP performance - 4 ball - Wear scar (max.) DIN 51350/5, 1400N | 0.5 mm |
| EP Performance - 4 Ball - Weld Load (min.) DIN 51350/4 | 3200 N |
| Flow pressure, DIN 51805-2 | <1400 mBar at -10°C |
| NLGI Consistency Class | 1 |
| Operating Temperature Range | 0-120 °C |
| Pack Height | 238 mm |
| Pack Length | 55 mm |
| Pack Width | 55 mm |
| Packsize | 420 ml cartridge |
| Penetration DIN ISO 2137, Prolonged (max.), 100 000 strokes, 10⁻¹mm | 25 |
| Penetration DIN ISO 2137, Worked, 60 strokes (10⁻¹mm) | 310-340 |
| Rolling bearing grease life (max.) ROF test, L50 life, 10000 r/min, hrs at °C | 700 at 220°C |
| Shelf Life | 5 year |
| Thickener | Polyethylene |
| Water wash-out test, ISO 11009 | <10% at 38 °C |
LMCG 1/0.4
